Call now: (07) 5563 1982

+3

1/2" BODY Flat Face Hydraulic Couplers UNO Threads Pair ISO16028

RQFF-F-0812UNO
AU$94.00
Out of stock
1
Product Details
Brand: Hydraulic.Online

1/2" BODY Flat Face Hydraulic Couplers 3/4", 7/8" & 1-1/16" UNO thread Pairs

Zero drips dry break Flat face couplers are now used extensively on all types of Hydraulic machinery, Flat Face Quick Connect Hydraulic Couplers are a common type of flat face coupler.

These have an USA 3/4" UNOThreads with the common 1/2" sized body.


Need Help?

Call us on (07) 5563 1982

ENGMATTEC Flat Face quick connect hydraulic couplings are our own Brand manufactured for us and are suitable for applications involving dusty or dirty environments and where oil loss on disconnection cannot be tolerated.

This series of couplings are designed for use in excavator hamhydraulic and Auger circuits and other applications involving high pressure pulses. Construction plant, mobile equipment, general industrial, mining and agricultural.

These 1/2" flat face couplers are compatible with;

Industry Interchangeability - mates with other manufacturers' ISO 16028 couplings such as Faster 2FFI, Cejn x62, Hansen Qa2900, and Parker FE/FF/FEM series, DNP PLT4, Stucchi FIRG/A Series, Ryco R110-06/08, Safeway FF49, Aeroquip FD89/FD49

The above price is for one pair, (one set which includes one male and one female coupler) single male/female halves are available, please call or email.

Please refer to our size charts below for correct sizing. The best measurement to use is 'J' column.

Threaded Connections

3/4" UNO

Rated Working Pressure

350 Bar (5100 PSI)

Flow Rates

From 20 to 70

Pressure drops

less than 0.1 Bar @ 20 Litres / Minute

6 Bar @ 150 Litres / Minute


Operating Temperatures

-20 to 100 degrees Celsius

Materials of Construction

Carbon steel body, treated to increase hardness and corrosion resistance, Nitrile seals. H Series couplings are Zinc plated.

Weight

750 gms

Features

Flat mating faces are easily wiped clean to prevent the ingress of contaminants.

Improved flow path minimises the pressure drop.

Non-spill design avoids fluid loss during connection and disconnection.

No air intrusion during connection.

Locking sleeve prevents accidental disconnection.

Zinc nickel surface treatment and meets 200 hour salt spray tests.

Standard

This Series conform to ISO 16028 (2006) in all respects

Connection / Disconnection Under Pressure

Connection with residual pressure in the line will be difficult or impossible. For applications where connection under pressure is required, HCP male couplings, or screw couplings from either the HSC, HS or RS ranges are recommended.

Disconnection of any quick disconnect / quick release coupling whilst under full system pressure can be very dangerous and should not be attempted.

Buy with Confidence from a long established Hydraulic Service Center get a 12 month warranty and an Australian Tax Invoice.
Email: hosefixersaustralia@gmail.com
Phone: 07 5563 1982
Hours: 8am to 4pm Monday - Friday, excluding public holidays
Tax invoices are supplied with every purchase
Out of Stock
It is our desire to always have every listed item actively in stock. Occasionally (but very seldom) due to high demand, short supply or human error we may be momentarily out of stock on an item. If this happens you will be notified and given the option to either cancel for a full refund or wait for the part to come in (typically 3-14 days).
If you have any questions please don’t hesitate to contact us for further assistance.
Best regards,
Hydraulic.Online

IMPROPER SELECTION, INSTALLATION, IMPLEMENTATION AND/OR OPERATION BY ANYONE OTHER THAN PERSONS WITH APPROPRIATE TECHNICAL AND MECHANICAL TRAINING CAN RESULT IN DAMAGE TO EQUIPMENT OR PROPERTY, SERIOUS PERSONAL INJURY OR DEATH. PROPER PRECAUTIONS AND SAFETY PROCEDURES SHOULD BE IMPLEMENTED PRIOR TO INSTALLATION AND OPERATION OF EQUIPMENT.

PIC$RL 11.5.22

Save this product for later
Display prices in: AUD

All your hydraulic needs in one place! Search products or browse categories below

Products on Hydraulic.Online are described and explained in non technical terms, with photos, charts and or videos. Most of our clients also tend to upgrade to more complete systems this is because they can pick up a phone and call us for a consultation. Call us and experience it for yourself! Australia +61 (07) 5563 1982.

(Hours 8am – 4pm Monday – Friday AEST, excludes National & QLD public holidays)

https://www.youtube.com/watch?v=jpHhaZJd4IE