Phone: (07) 5563 1982 | 1300 146 737

Select Page

1/2 inch 2 Wire Hydraulic Hose 10 - 100m Coils New Stock 4000 psi

H-R2-08_10
AU$110.00
In stock
1
Product Details
Brand: ENGMATTEC

ENGMATTEC 1/2" ID Two Wire HYDRAULIC HOSE
Maximum Working Pressure 4,000 PSI (275 bar)
High Temp Resistance to +120°C

This is a quality imported hose made to meet or exceed US Spec SAE100R2AT
as well as German EN 853 Standards.



100R2AT 1/2" DN12 Hose is also fully compatible, interchangeable and or as a direct replacement for the follow brands of hose.

  • RYCO AVENGER T28A and RYCO DIEHARD T28D Non-Skive Hoses.
  • GATES 8CR2 and
  • PARKER 301SN-8 NON SKIVE HOSE
  • MANULI FLUICONNECTO 2SN FL2T08
  • PIRTEK SAE 100R2AT, SIZES R2AT-08.
  • TOTAL RUBBER SUNFLEX SAE 100 R2AT EN 853 2SN, SIZE HYD-R2T-08-SF-S

  • 100R2AT 1/2" Hose can also be used with the following hose fittings
  • RYCO BITELOK ONE-PIECE CRIMP NON SKIVE T200 AND T700 hose tails
  • EATON TTC / Z Series braided hose one-piece bite the wire style hose fittings.
  • Southcott Super Crimp S series stems with FNP-06 ferrules as well as Ezi-Crimp Non Skive One Piece Series E fittings.
  • CHILD FIELD FIT COUPLINGS Series RMB, RFB, RMJ, RFJ, with BN2-08 non skive Bodies.
  • RYCO FIELD ATTACHABLE L SERIES L00-08 FERRULES and 600 SERIES INSERTS.
  • TAIPAN 100R2GP-08AHF and 100R2-08AHF hose and K08 series one piece non skive hose tails and or Field Attachable D06 Tails and D2-08 Bodies

This hose is Certified to work without failure a minimum of 200,000 Impulse Cycles (equivalent to almost 1000 excavator earth moving hours) at 133% of maximum pressure (5300 psi) and at 100% of maximum temperature 120 °C.

We have used this same hose extensively in our hydraulic service trucks, & on new builds.
It has a great tough outer case, yet is very flexible for ease of fitting.
This hose is a quality product that suits either crimped ends,
or Use our D.I.Y field fit reusables from this store.


SAE 100R2AT– 08 NON SKIVE HOSE (Two Wire)

*** Please note for lengths greater than 20m one of more cuts may be used to make up the full length, please let us know if you require a continuous length and we will do our best to accomodate ***


Construction

Synthetic rubber inner tube with two layers of braided high tensile steel wire reinforcement and a wrapped tough, oil, Ozone, weather and abrasion resistant synthetic rubber outer cover.


Application

High pressure service with petroleum base hydraulic fluids, water, Air, Water-glycol, water-oil, fire resistant hydraulic fluids, hot oil grease, lubricants, crude and fuel oils. For air applications above 100 PSI the cover should be pin pricked


Need another hose size, field fit reusable fittings couplers and or adaptors for your application? Please see our extensive 'crimp on' hose ends & field fit re-usables.


Specifications


Pressure Range

Working Pressure: 4000 PSI

Burst Pressure: 16000 PSI (Minimum)

Range of Temperature


-40⁰C to + 120⁰C

Minimum Bend Radius


135mm

Weight

0.65 KG/Mtr


Freight

20/09/19 MM $ Abc Pic

22/08/2023 MM $ abc, Pic, Atl tags, Seo

Save this product for later

All your hydraulic needs in one place! Search products or browse categories below

Products on Hydraulic.Online are described and explained in non technical terms, with photos, charts and or videos. Most of our clients also tend to upgrade to more complete systems this is because they can pick up a phone and call us for a consultation. Call us and experience it for yourself! Australia +61 (07) 5563 1982.

(Hours 8am – 4pm Monday – Friday AEST, excludes National & QLD public holidays)

https://www.youtube.com/watch?v=jpHhaZJd4IE