10m Coil Hydraulic Hose SAE100R2AT 2 Wire 1/4", 3/8", 1/2" & 3/4"

Gates ® Pro Series hose is a high-quality product offering the same durability and reliability
of big-name brands like Eaton & Parker at fraction of the cost.
Reinforced with two layers of Braided High tensile Steel wire this non-skive hose
meets or exceeds German DIN standard EN 853 2SN / and American Standard SAE 100R2AT
This Two-Wire Hydraulic Hose is compatible with all 2 wire standard crimp-on and field-fit reusable fittings.

Please contact us for detailed and accurate crimp dimensions

ENGMATTEC two 2 wire hydraulic hose is compatible with
GATES 4G2, 6G2, 8G2, 12G2 and GATES High-Temperature 4G2H, 6GTH, 8G2H, 12G2H
EATON GH195 AQP HI-IMPULSE hoses
MANULI FLUICONNECTO 2SN FL2T04 FL2T06 FL2T08 FL2T12
MANULI FLUICONNECTO ROCKMASTER 2SC H01030006 H01030010, H01030012, H01030019 (DOUBLE THIS HOSE’S BEND RADIUS, SLIGHTLY LESS WEAR RESISTANCE)
PARKER 301SN - 4, -6, -8, -12 NON SKIVE HOSE
PIRTEK SAE 100R2AT
SIZES R2AT-04, R2AT-06, R2AT-08, R2AT-12
TOTAL RUBBER SUNFLEX SAE 100 R2AT EN 853 2SN
SIZES HYD-R2T-04-SF-S, HYD-R2T-06-SF-S, HYD-R2T-08-SF-S, HYD-R2T-12-SF-S.
RYCO AVENGER SIZES, T24A, T26A, T28A, T212A and
RYCO DIEHARD SIZES, T24D T26D T28D AND T212D Non-Skive Hoses.
Engmattec hydraulic two wire hose four most common hydraulic hose bore sizes are as follows.
100R2AT 1/4" DN6
100R2AT 3/8" DN10
100R2AT 1/2" DN12
100R2AT 3/4" DN19
All the Hoses listed above can also be used with the following branded hose fittings with the following part numbers.
Our own Engmattec 2-piece hose tails and ferrules are

Available for both one (1) and two (2) wire braided hoses in
04 - ¼”a, 06 - ⅜”, 08 - ½”,12 - ¾” and 1” - 16.
For example, the following sizes and thread types are available
JIC female and male hose tails sizes, E12JF, E12JM,
BSP female and male hose tails sizes, E12BF, E12BM
all available with our own EngMatTec EMT Crimp on NO SKIVE Ferrules
They are available in the following size ENPR212 (¾”)
Contact us for stock AND or Crimp Dimensions.
https://www.hydraulic.online/store/

ENGMATTEC HYDRAULIC HOSE IS ALSO COMPATIBLE with the following Hydraulic Hose Fittings.
RYCO BITELOK ONE-PIECE CRIMP NON-SKIVE T200 AND T700 hose tails.
EATON TTC / Z Series braided hose one-piece "bite the wire" style hose fittings.
Southcott Super Crimp S series stems with FNP-04, FNP-06, FNP-08, and FNP-12 ferrules as well as Ezi-Crimp Non-Skive One Piece Series E fittings.
CHILD FIELD FIT COUPLINGS Series RMB, RFB, RMJ, RFJ, with BN2-12 non-skive Bodies.
RYCO FIELD ATTACHABLE L00 SERIES LOO-12 FERRULES and 600 SERIES INSERTS.
TAIPAN K SERIES ONE-PIECE NON-SKIVE HOSE TAILS
K12JF, K12JM and K12BF, K12BM or
Field Attachable D Series eg D12 Tails and D2 Series Bodies eg D2-12 Body.
The picture is of a hose of a Similar Construction Hose and Appearance.
Construction
Synthetic rubber inner tube with Two layers of braided high tensile steel wire reinforcement and a wrapped, Oil, Ozone, weather, and abrasion resistant synthetic rubber outer cover.
Application
High-pressure service with petroleum base hydraulic fluids, water, Air, Water-glycol, water-oil, fire-resistant hydraulic fluids, hot oil grease, lubricants, crude, and fuel oils. For air applications above 100 PSI, the cover should be pin pricked.
Need another hose size, field fit reusable fittings couplers, and or adaptors for your application?
Just contact us at (07) 5571 6155, (07) 5563 1982