20M Coil 3/4" 2 wire Hydraulic Hose SAE100R2AT 3100 PSI

Need Help?

Call us on (07) 5563 1982
ENGMATTEC HYDRAULIC HOSE 3/4" ID Two Wire 3118 PSI Working Pressure Flame Resistant 20 Meters
ENGMATTEC 100R2AT 3/4" DN19 Hose is also fully compatible, interchangeable, and or as a direct replacement for the following brands of hose.
RYCO AVENGER T212A and RYCO DIEHARD T212D Non-Skive Hoses.
GATES 12G2 and 12G2H
EATON GH195 AQP HI-IMPULSE hoses
PARKER 301SN-12 NON SKIVE HOSE
MANULI FLUICONNECTO 2SN FL2T12
MANULI FLUICONNECTO ROCKMASTER 2SC H01030019
PIRTEK SAE 100R2AT, SIZES R2AT-12.
TOTAL RUBBER SUNFLEX SAE 100 R2AT EN 853 2SN, SIZES HYD-R2T-12-SF-S.
ENGMATTEC 100R2AT 1/4" DN6 Hose can also be used with the following hose fittings
RYCO BITELOK ONE-PIECE CRIMP NON-SKIVE T200 AND T700 hose tails
EATON TTC / Z Series braided hose one-piece bite the wire style hose fittings.
Southcott Super Crimp S series stems with FNP-12 ferrules as well as Ezi-Crimp Non-Skive One Piece Series E fittings.
CHILD FIELD FIT COUPLINGS Series RMB, RFB, RMJ, RFJ, with BN2-12 non-skive Bodies.
RYCO FIELD ATTACHABLE L SERIES L00-12 FERRULES and 600 SERIES INSERTS.
TAIPAN 100R2GP-12AHF and 100R2-12AHF hose and K12 series one-piece non-skive hose tails and or Field Attachable D12 Tails and D2-12 Bodies
This hose is Certified to work without failure a minimum of 200,000 Impulse Cycles (equivalent to almost 1000 excavator earth moving hours) at 133% of maximum pressure (4120 psi) and at 100% of maximum temperature 120 °C.
This is a great quality hose made to meet or exceed U.S. SAE (Society Automotive Engineers) Specifications SAE 100R2-12 as well as German Standard EN 853.
SAE 100R2AT – 12 NON SKIVE HOSE (Two Wire)

It is suitable for reusable hose ends also.
Construction
Synthetic rubber inner tube with Two layers of braided high tensile steel wire reinforcement and a wrapped, Oil, Ozone, weather, and abrasion-resistant synthetic rubber outer cover.
Application
High-pressure service with petroleum base hydraulic fluids, water, Air, Water-glycol, water-oil, fire-resistant hydraulic fluids, hot oil grease, lubricants, crude, and fuel oils. For air applications above 100 PSI, the cover should be pin pricked.
Need another hose size, field fit reusable fittings couplers, and or adaptors for your application?
Just send us a message with any questions you may have.
Specifications
Pressure Range
Working Pressure: 3100 PSI (215 bar)
Burst Pressure: 12470 PSI (Minimum)
Range of Temperature -40⁰C to + 120⁰C
Minimum Bend Radius 240mm
Weight 0.94 KG/Mtr
Freight
Please note, shipping rates are based on the Australia Post calculator. If your delivery address is in a major center we can use couriers at a better rate. Feel free to email or call for a freight quote. Please contact us for a more competitive shipping quote.
We are able to send depot to depot which can lower the freight charges.
Additional information about us...
Tax invoices are supplied with every purchase
Messages will be answered within normal business hours (ie: 8.30 am - 5.00 pm M-F)
Please send us a message with any questions you may have.
hosefixersaustralia@gmail.com

075563192
Best regards,
Hydraulic.Online