3/8" Pressure Washing Shut-Off Valve c/w Male & Female Quick Connect Couplers

High Quality 3/8" quick connect couplers & 500 bar (7,350 psi) Steel shut of Ball Valve with High temp Seals and Hard Chrome Sealing Ball.

Quality items manufactured in Italy.

Don't waste your money & and avoid the frustration with Cheaper made copies, they may look similar, but water blasters drain cleaners and jet rodders stress items to their maximum.

Cheaper valves and quick connect fittings will quickly deform leading to leaks or the fittings being difficult if not impossible to remove and or reconnect. We see it all the time at our service centre, Our fittings are built for the job.

Our Quick connect coupling are the ideal choice where a tough, durable product of Superior Quality is required for your high pressure water blasting needs.

The couplers are quality fittings and are pressure rated for 4040psi or 280 bar. the Steel Ball Valve is Pressure rated to 500 bar (7350 psi) They are suitable for a medium size home pressure washer up to professional large petrol pressure washers. The 3/8" size allows for a large flow rate.

## Please note; Ball valves are designed only to be used in either an On or Off position only. They are not designed to adjust flow. Doing so will eventually cause the 'Ball' seal to fail.

Also, if using your old Male fitting, be aware if it has already 'mushroomed'(deformed) , it may pull the sealing o'ring out of our female fitting causing it to stop sealing.

These are easily replaced with the correct size O'ring. They are a 12mm ID x 2.5mm cross section.

Typical applications include:

The above price is for one ball valve with male/female quick connectors

Need Other styles or sizes of couplers and or adaptors to suit your application?

Please send us a message with any questions you may have.

Dimensions and Performance

Rated Working Pressure

Couplings 280 bar (4050 PSI)

Ball Valve 500 bar (7350 psi)

Flow Rates

up to 35 Litres/Minute

Length

19 cm x 4 cm x 4 cm

Weight

900 grams