Phone: (07) 5563 1982 | 1300 146 737

4FFI Old Style Bobcat Female Dry-Break Flat-Face Coupler

4FFI-BOBCAT-F
AU$107.95
In stock
1
Product Details
Brand: ENGMATTEC

This Female Quick Connect Hydraulic manifold coupler is a direct replacement for Older Bobcat equipment fitted with the “OLD STYLE” 4BD4FI Manifold. Bobcat part number 6680018.

FREE Dust Cap

(see below for compatible Bobcat models)

it is designed to screw into the "Old Style" manifold mounted on the arm or boom of the machine that supports the Bucket.
Fully interchangeable and connectable with all other flat face couplers manufactured to ISO 16028

This range of couplers was designed to allow for a fast tools free “dry break” changeover of hydraulic attachments such as Buckets, Augers, Trenchers, Grapples, Brooms, Slashers, Sweepers,

If you have a Bobcat Skid Steer Loader, Track Loader, Compact loader, or Excavator, then chances are your machine is fitted with these couplers and someday they will require replacement.
Save your back and prevent blisters get yourself a set of spares because if you knock and damage one of these then you and your machine are out of action (unless you like to using a spade or shovel)

Specifications.
Bobcat Part Number 6680018
Faster, Part Number 4FFI-12
Description “Kit Coupler”
Please note this coupler cartridge is for the “OLD STYLE” 4BD4FI Manifold
These couplers have an external Metric Thread measuring Ø46mm with a 1.5 mm pitch (approx. Ø 1-13/16” with 17 T.P.I )
The male end has a diameter of 24.5 mm
It is also identified by its Three (3) Sets of external Black O Rings with 3 White Backing Rings.
(The new Style coupler has an external Metric Thread measuring Ø 48mm with a 1.5 mm pitch (approx. Ø 1-7/8” with 17 T.P.I ) and only has two (2) O Rings (one Black and one Blue) and No White Backing rings.


  • Maximum Working Pressure 350 Bar (5145 PSI)
  • Nominal Size, Dash 08, 12.5 mm, ½”
  • Rated Flow Rate up to 110 Lt / Min (27.5 Gallons / Min)
  • Virtually Dry Break on Disconnect (less than 0.01ml)
  • Connect under pressure? Yes
  • Force required to connect 210 N (21 KG) (47 pounds)
  • Minimum Burst pressure 1400 Bar (20500 PSI)
  • Operating temperature -40 Degrees Celsius to +105 Degrees Celsius
  • the female coupler has a lockable collar to prevent accidental disconnection

Machine Compatibility:
Bobcat Skid Steer Models 753, 763, 773863, 864, 883
A220.A300.A770.
S130 through to the S850.
Bobcat Track Drive Models T140 through to the T870.
Bobcat Telescopic Loader, Reach Truck Models TL360, TL470, TL470HF.
Bobcat Tool Cat Models 5600, 5610.
These 1/2" flat-face couplers are compatible with.
DNP PLT4, Stucchi FIRG/A Series, Faster 2FFI , Hansen QA, Ryco R110-06/08, Safeway FF49, Aeroquip FD89/FD49


Email: Please click here to email us

phone: 07 5563 1982

Hours: 8 am to 4 pm Monday - Friday, QLD time excluding public holidays
If you have any questions please don’t hesitate to contact us
Best regards,
Hydraulic.Online
Improper Selection, Installation, Implementation, And/Or Operation By Anyone Other Than Persons With Appropriate Technical And Mechanical Training Can Result In Damage To Equipment Or Property, Serious Personal Injury, Or Death. Proper Precautions And Safety Procedures Should Be Implemented Before The Installation And Operation Of Equipment.

MM 20/01/2024 $ abc, Alt text, Feed

Save this product for later

All your hydraulic needs in one place! Search products or browse categories below

Products on Hydraulic.Online are described and explained in non technical terms, with photos, charts and or videos. Most of our clients also tend to upgrade to more complete systems this is because they can pick up a phone and call us for a consultation. Call us and experience it for yourself! Australia +61 (07) 5563 1982.

(Hours 8am – 4pm Monday – Friday AEST, excludes National & QLD public holidays)

https://www.youtube.com/watch?v=jpHhaZJd4IE