5/8" ID SAE100R2-10 2 Wire Hose 3625 PSI GATES 10 CR2

GATES 10 CR2 100R2-10 5/8" Two Wire Hydraulic Hose

This is a high quality hose made to SAE (Society Automotive Engineers) Specifications SAE 100R2-10. 5/8" inside diameter. Used in both industrial or agricultural hydraulics. Made by USA owned GATES, over 50 years manufacturing hydraulic products.

SAE 100R2 – 10 NON SKIVE HOSE (Two Wire)

This hose is Certified to work without failure a minimum of 200,000 Impulse Cycles (equivalent to almost 1000 excavator earth moving hours) at 133% of maximum pressure (4820 psi) and at 100% of maximum temperature 100 °C.

Suitable for either swage on fittings or re usable hose tails. (see our listings)
Synthetic rubber inner tube with Two layers of braided high tensile steel wire reinforcement and a Covered with a smooth Oil, Ozone, Weather and Abrasion Resistant synthetic rubber outer cover.

Industries and Application

• Agriculture and Farm equipment
• Construction and Demolition
• Mining and Quaries
• Manufacturing Light Medium and Heavy
• Return Lines
• Low Flex Accesory Lines
• Auxiliary Lines
• Drain Lines

High pressure service with petroleum base hydraulic fluids, water, Air, Water-glycol, water-oil, fire resistant hydraulic fluids, hot oil grease, lubricants, crude and fuel oils. For air applications above 100psi the cover should be pin pricked.

Need another hose size, field fit reusable fittings couplers and or adaptors for your application?

Just Contact us on 07 5563 1982

Pic $ RL 24.10.22