50 m coil 3/8 inch Hydraulic Hose SAE100R1-06 2600 PSI

Quality 50 m coil of 3/8 inch Inside diameter hose is made in Europe to SAE (Society Of Automotive Engineers)

SAE 100R1 – 06 NON SKIVE HOSE (One Wire) 50 metres
Pictures are of the is of the actual hose.
Construction
Synthetic rubber inner tube with one layer of braided high tensile steel wire reinforcement,
an oil, Ozone, weather, and abrasion-resistant synthetic rubber outer cover.
Application
High-pressure service with petroleum base hydraulic fluids,
Water, Air, Water-glycol, water-oil, fire-resistant hydraulic fluids,
hot oil, grease, diesel fuel, lubricants, crude, and fuel oils.
For compressed air applications above 100 psi, the outer cover should be pin pricked.
Specifications
Working Pressure: 2600 PSI (180 bar)
Burst Pressure: 10400 PSI (Minimum) (720 bar)
Range of Temperature -40⁰C to + 120⁰C
Minimum Bend Radius 130mm
Weight 0.34 KG/M
Please note for lengths greater than 20m one or more cuts may be used to make up the full length, please let us know if you require a continuous length and we will do our best to accommodate

Please send us a message for more information.
Email: hosefixersaustralia@gmail.com

Phone: 07 5563 1982
Hours: 8 am to 4 pm Monday - Friday, excluding public holidays
If you have any questions please don’t hesitate to contact us
Best regards,
Hydraulic.Online
Improper Selection, Installation, Implementation, And/Or Operation By Anyone Other Than Persons With Appropriate Technical And Mechanical Training Can Result In Damage To Equipment Or Property, Serious Personal Injury, Or Death. Proper Precautions And Safety Procedures Should Be Implemented Prior To The Installation And Operation Of Equipment.