Call now: (07) 5563 1982

50m Coil Hydraulic Hose SAE100R2AT 2 Wire 1/4", 3/8", 1/2" & 3/4"

04-50M
AU$444.00
In stock
1
Product Details

please note 1/4 and 3/8 hose on this listing Gates Pro Series will be supplied

50 m reel of European Made EN 853 2SN / SAE 100R2AT High Temp (120°C) Two Wire Hydraulic Hose
Hose Bore Sizes 1/4", 3/8", 1/2" & 3/4" are all reinforced with two layers of Braided High Tensile Steel Wire.


Size ID (inches) ID (mm) OD (mm) Max. Working Pressure Burst Pressure Bend Radius
100R2AT-04 1/4" 6.4mm 14.8mm 5800 PSI 400 BAR 23200 PSI 1600 BAR 100mm
100R2AT-06 3/8" 9.5mm 18.7mm 4800 PSI 330 BAR 19200 PSI 1320 BAR 130mm
100R2AT-08 1/2" 12.7mm 22.2mm 4000 PSI 276 BAR 16000 PSI 1103 BAR 200mm
100R2AT-12 3/4" 19mm 29.3mm 3100 PSI 215 BAR 12400 PSI 860 BAR 240mm

ENGMATTEC is a high-quality, European-made product offering the same durability and reliability of big-name brands like Gates, Eaton & Parker, and Ryco at fraction of the cost. Our non-skive EN 853 2SN / SAE R2AT Two-Wire Hydraulic Hose is compatible with all standard crimp-on and field fit fittings.


Please contact us for detailed and accurate crimp dimensions
ENGMATTEC two 2 wire hydraulic hose is compatible with almost all common hoses
ENGMATTEC HYDRAULIC TWO WIRE HOSE FOUR MOST COMMON HYDRAULIC HOSE BORE SIZES ARE AS FOLLOWS.,
100R2AT 1/4" DN6,
100R2AT 3/8" DN10,
100R2AT 1/2" DN12,
100R2AT 3/4" DN19
ALL THE Hoses listed above can also be used with the following branded hose fittings with the following part numbers.
Our own ENGMATTEC 2 PIECE HOSE TAILS AND FERRULES ARE
AVAILABLE FOR BOTH One (1) AND Two (2) WIRE BRAIDED HOSE
04 - ¼”a, 06 - ⅜”, 08 - ½”,12 - ¾” and 1” - 16.
FOR EXAMPLE, THE FOLLOWING SIZES AND THREAD TYPES ARE AVAILABLE
JIC FEMALE AND MALE HOSE TAILS SIZES, E12JF, E12JM,
BSP FEMALE AND MALE HOSE TAILS SIZES, E12BF, E12BM
ALL AVAILABLE WITH OUR OWN EngMatTec EMT Crimp on NO SKIVE Ferrules
THEY ARE AVAILABLE IN THE FOLLOWING SIZE ENPR212 (¾”)
Contact us for stock AND or Crimp Dimensions.
https://www.hydraulic.online/store/
ENGMATTEC HYDRAULIC HOSE IS ALSO COMPATIBLE with most common Hydraulic Hose Fittings
including
RYCO FIELD ATTACHABLE L00 SERIES LOO-12 FERRULES and 600 SERIES INSERTS.
TAIPAN K SERIES ONE-PIECE NON-SKIVE HOSE TAILS
Field Attachable D Series eg D12 Tails and D2 Series Bodies eg D2-12 Body.
Construction
Synthetic rubber inner tube with Two layers of braided high tensile steel wire reinforcement and a wrapped, Oil, Ozone, weather and abrasion-resistant synthetic rubber outer cover.
Application
High-pressure service with petroleum base hydraulic fluids, water, Air, Water-glycol, water-oil, fire-resistant hydraulic fluids, hot oil grease, lubricants, crude, and fuel oils. For air applications above 100 PSI, the cover should be pin pricked.
Please note for lengths greater than 20m one or more cuts may be used to make up the full length, please let us know if you require a continuous length and we will do our best to accommodate
Need another hose size, field fit reusable fittings couplers, and or adaptors for your application?
Just contact us at (07) 5571 6155, (07) 5563 1982


Save this product for later

All your hydraulic needs in one place! Search products or browse categories below

Products on Hydraulic.Online are described and explained in non technical terms, with photos, charts and or videos. Most of our clients also tend to upgrade to more complete systems this is because they can pick up a phone and call us for a consultation. Call us and experience it for yourself! Australia +61 (07) 5563 1982.

(Hours 8am – 4pm Monday – Friday AEST, excludes National & QLD public holidays)

https://www.youtube.com/watch?v=jpHhaZJd4IE