Phone: (07) 5563 1982 | 1300 146 737

Select Page

Auger + Hammer Hose Assemblies 1/2" with BSP JIC ORFS UNO Hose-Tails

Aug Hamr Hose
AU$78.95
In stock
1
Product Details
Brand: Hydraulic.Online
2 metre long Engmattec or Gates 1/2 inch bore 4,000 psi two wire Hydraulic Hose Assembly for Hammer (Rock Breaker) and Auger (Earth Drills)
H
oses come with crimped on steel Hose Fittings and optional extras such as hose burst sleeve, Wrap, and flat face couplings.
Option one
A two metre long 1/2" two wire Hydraulic hose rated to 4000 psi
Hose comes with one x 1/2" BSP Female straight , & one x 90° BSP female end
or a
Option two
A two metre long 1/2" two wire Hydraulic hose rated to 4000 psi with a compact 7/8" Male UNO Swivel 90 elbow, these compact 90 elbow fittings are essential for some models of Auger (Earth Drill) (please see photo number 5) and one x 1/2" BSP Female end.

Also available as an extra options

  • Add a pair of dry break 1/2" Flat Face Couplers with adaptors to suit your selected hose fittings.
  • Adding Hose Burst Protection sleeve, improves hose abrasion resistance and protects operators and machinery in the event of a hose failure from Spraying hot high-pressure oil.
  • or by adding Spiral Safety Guard to your hydraulic Hoses you will improve your hose's abrasion resistance by 300%

These hammer (or Rock Breaker) and Auger (or Earth Drill) hose assemblies are also available at different lengths and hose bores
and with BSPP, JIC, ORFS and or Metric hose fittings on each End.

Please call up on QLD 07 5563 1982 or

email us at sales@mhfgc.com.au

If you need these hose assemblies shorter, or with JIC ends, just message us (same price) Hammer & Auger hoses are a 'consumable' in the hydraulic and earthmoving industry.
Because of the many pulses & constant bending, they tend to blow out frequently. These hose assemblies are the same quality as you would get from Pirtek or Enzed or Hydraulink but at half the Price.

If you need different ends etc, you are able to order custom lengths & ends as per below
****PLEASE READ BELOW !!****
Due to listing limitations we are unable to customise our listings to make it easier for you to get what you need .
Message us with desired length ends combinations & we will make a custom listing in eBay for the specific item you desire

Construction Synthetic rubber tube: two braids of special high tensile steel wire reinforcement separated by synthetic rubber layer; oil, weather and abrasion resistant synthetic rubber outer cover. Application Medium to High Pressure hydraulic lines.
Suitable for petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water glycol based fluids and air. For air applications above 100psi the cover should be pin pricked. Range of Temperature -40˚C to +100˚C Couplings 275 Bar, 4200psi


Buy with Confidence from a long-established Hydraulic Service Center get a 12 month warranty and an Australian Tax Invoice.
Email: hosefixersaustralia@gmail.com
Phone: 07 5563 1982
Hours: 8am to 4pm Monday - Friday, excluding public holidays
Tax invoices are supplied with every purchase
Out of Stock
It is our desire to always have every listed item actively in stock. Occasionally (but very seldom) due to high demand, short supply or human error we may be momentarily out of stock on an item. If this happens you will be notified and given the option to either cancel for a full refund or wait for the part to come in (typically 3-14 days).
If you have any questions please don’t hesitate to contact us for further assistance,
Best regards,

Hydraulic.Online


IMPROPER SELECTION, INSTALLATION, IMPLEMENTATION AND/OR OPERATION BY ANYONE OTHER THAN PERSONS WITH APPROPRIATE TECHNICAL AND MECHANICAL TRAINING CAN RESULT IN DAMAGE TO EQUIPMENT OR PROPERTY, SERIOUS PERSONAL INJURY OR DEATH. PROPER PRECAUTIONS AND SAFETY PROCEDURES SHOULD BE IMPLEMENTED PRIOR TO INSTALLATION AND OPERATION OF EQUIPMENT.

MM 08/01/2024 $ abc, SEO Pic, Alt tags, Feed

Save this product for later

All your hydraulic needs in one place! Search products or browse categories below

Products on Hydraulic.Online are described and explained in non technical terms, with photos, charts and or videos. Most of our clients also tend to upgrade to more complete systems this is because they can pick up a phone and call us for a consultation. Call us and experience it for yourself! Australia +61 (07) 5563 1982.

(Hours 8am – 4pm Monday – Friday AEST, excludes National & QLD public holidays)

https://www.youtube.com/watch?v=jpHhaZJd4IE