Phone: (07) 5563 1982 | 1300 146 737

Select Page

Cetop 5 Hydraulic Solenoid Valve Replacement 80-100lpm

Cetop 5 4WE
In stock
Product Details

CETOP 5 solenoid Directional Flow Control Valve

These are high-quality CETOP 5 Electric Solenoid Operated Directional valves. These are made to a worldwide standard size & bolt holes etc. CETOP 5 solenoid valves are solenoid operated and control the start, stop, and direction of the oil flow in the hydraulic circuit. It comes complete with solenoids & DIN plugs & bolts. Please note; this listing is ONLY for a Cetop 5 valve, you will require a 'subplate' if intending to make a free-standing control valve. See other listings. This is a simple swap in / out to replace your faulty/old Cetop 5.

We also stock & supply a large range of Cetop 3 & Cetop 5 models, including various ported sub-plates, counterbalance sub-plates, manifolds as well as up to 8-section sandwich valves.


Construction = Monoblock
Material of Construction = Steel
No of Spools = 1
Material of Construction = Case Hardened Steel
O-rings made of NBR (Buna-N®)
Max Flow Rate = 80 liters/min
Max Working Pressure = 315 Bar (4600 PSI)
Spool Type = Cylinder Spool (Closed Centres), Open, Float, and Tandem Centres are also available at no extra cost,
Spool Movement = Electric Solenoid Coil with illuminated LED din plugs, Spring Return to Center.
Solenoid Coil Voltage 12 Volts DC 24 V DC or 240 AC
Operating temperature range: -20 °C to + 80°C

DM$ 15/05/23

Save this product for later

All your hydraulic needs in one place! Search products or browse categories below

Products on Hydraulic.Online are described and explained in non technical terms, with photos, charts and or videos. Most of our clients also tend to upgrade to more complete systems this is because they can pick up a phone and call us for a consultation. Call us and experience it for yourself! Australia +61 (07) 5563 1982.

(Hours 8am – 4pm Monday – Friday AEST, excludes National & QLD public holidays)