Directional Flow Control Valve BSP Ports 2 Spool 40 Lpm Monoblock EUROPEAN MADE

HID MB3-2
AU$190.95
In stock
1
Product Details

Hydraulic 2 Spool 40 Lpm Directional Flow Control Valve Monoblock EUROPEAN MADE

LAST ONE, sorry no Detents available

This is a brand new high quality, made in Europe directional control valve, it is designed for any application where you need to control 2 individual function or cylinder.
These valves are regularly used in hydraulic circuits to divert the flow of high-pressure oil and are typically used to control the speed and movement of hydraulic cylinders or motors.
The ports are 3/8" Bspp A & B, & 1/2" Bspp P & T thread. There is a 'power beyond' port ('N'), which can be used as a pressure line if you ever wish to mount another valve downstream. There is an option for a power beyond sleeve . This needs to be inserted into the power beyond port to make this port open. If using this function, a tank return line MUST still be fitted!

As standard, this DCV comes with a cylinder spool. This is best for use with rams. Also available is a Motor spool. This is best used to run spinning motors, as they will come to a slow halt once lever is back in centre position. The lever action is a spring back to centre one. Ie. you must hold the lever 'On' to flow oil. It then springs back to centre to lock the oil. Another optional extra is 'Detent' This is mostly used for motors. When you pull or push the lever, the lever will stay where pushed, until you pull it back to centre.

Detent (lever stays up or down on its own) can be fitted for $40 per spool. Message us for this option.
Specifications
  • Construction = Monoblock
  • Material of Construction = Steel
  • No of Spools = 2
  • Material of Construction = Case Hardened Steel
  • O-rings made of NBR (Buna-N®)
  • Max Flow Rate = 40 liters/min (12 Gallons per Minute)
  • Max Working Pressure = 315 Bar (4750 PSI)
  • Spool Type = Cylinder. #Motor Spools also available $0 each.
  • Spool Movement = Lever action, Spring Return to Center.
  • Detent Kits also available at $40 each No Spring to centre
  • Built in Relief Valve = Adjustable (factory set at 1800 PSI)
  • Ports Sizes
  • Tank return Port 1/2" BSPP
  • Pressure A & B Ports 3/8" BSPP
  • Mounting Bolt centres ; 147mm x 81mm
  • Operating temperature range: -20 °C to + 80°C
  • Dimensions = L x W x H =
  • Weight4.6 KG
    Please call 0755631982, or send us a question for different spool configurations, spool numbers and costings.
    Many types of adaptors threads, hydraulic hose and field fit hose fittings are available please see our other listings.

    This a High Quality Valve and has many outstanding features, including.
    • built in adjustable relief valve
    • high performance,
    • high efficiency,
    • small volume,
    • mass flow,
    • leak resistance.
    In additional to compact size, these control valves have fixed and large pull rods to control direction,
    Various control options, manual, automatic and or remote control methods are also available including.
    • Motor Spool
    • Detent kit no spring return
    • Detent kit with spring return
    • Pneumatic spool control,
    • Hydraulic ControlFeatures
    • Compact construction.
    • Low pressure drop.
    • Long service life.
    • High efficiency.
    • Choice of various ports and circuit valves.
    • Spring return.
    • High accuracy spool is hardened for long term accuracy.
    • Sub-plate mounting.
    • Handle shift operation.


    • IMPROPER SELECTION, INSTALLATION, IMPLEMENTATION AND/OR OPERATION BY ANYONE OTHER THAN PERSONS WITH APPROPRIATE TECHNICAL AND MECHANICAL TRAINING CAN RESULT IN DAMAGE TO EQUIPMENT OR PROPERTY, SERIOUS PERSONAL INJURY OR DEATH. PROPER PRECAUTIONS AND SAFETY PROCEDURES SHOULD BE IMPLEMENTED PRIOR TO INSTALLATION AND OPERATION OF EQUIPMENT.

    Save this product for later

    All your hydraulic needs in one place! Search products or browse categories below

    Products on Hydraulic.Online are described and explained in non technical terms, with photos, charts and or videos. Most of our clients also tend to upgrade to more complete systems this is because they can pick up a phone and call us for a consultation. Call us and experience it for yourself! Australia +61 (07) 5563 1982.

    (Hours 8am – 4pm Monday – Friday AEST, excludes National & QLD public holidays)

    https://www.youtube.com/watch?v=jpHhaZJd4IE