Flat Face Hydraulic Coupler 1/4" BSPP One Pair Hi Pressure
|
is used on smaller or low oil flow (< 20 Lt / Min) Hydraulic machines. These 'Residual pressure, 1/4 inch couplers are some of the smallest Flat-face quick-connect couplers available. The design follows the common available for smaller oil flows in machinery. They have 1/4" BSPP Threads. It is easy to check compatibility. Please refer to our size charts in photos for correct sizing. The best measurement to use is 'J' column. ** Please note , this sale is ONLY for 1/4" x 1/4" couplers , This series of couplings are designed for use in and hydraulic circuits and These are not warranted if used for hydraulic hammers. These 1/4" flat face couplers are compatible with; DNP PLT4, Stucchi FIRG/A Series, Faster 2FFI , |
The above price is for one pair, (one set which includes one male and one female coupler)
single male/female halves are available, please call or email.
Please refer to our size charts below for correct sizing.
The best measurement to use is 'J' column.
Threaded Connections
1/4" BSPP
Pressure drops
less than 0.1 Bar @ 20 Litres / Minute
Operating Temperatures
-20 to 100 degrees Celsius
Materials of Construction
Carbon steel body, Heat treated to increase hardness and corrosion resistance,
Nitrile seals. H Series couplings are Zinc plated.
Features
Flat mating faces are easily wiped clean to prevent the ingress of contaminants.
Improved flow path minimises the pressure drop.
Non-spill design avoids fluid loss during connection and disconnection.
No air intrusion during connection.
Locking sleeve prevents accidental disconnection.
Zinc nickel surface treatment and meets 200 hour salt spray tests.
This Series conforms to ISO 16028 (2006) in all respects
Connection / Disconnection Under Pressure
If you have any questions, please, don’t hesitate to contact us for further assistance,
Best regards,
Hydraulic.Online hosefixersaustralia@gmail.com 07 5563 1982
IMPROPER SELECTION, INSTALLATION, IMPLEMENTATION AND/OR OPERATION BY ANYONE OTHER THAN PERSONS WITH APPROPRIATE TECHNICAL AND MECHANICAL TRAINING CAN RESULT IN DAMAGE TO EQUIPMENT OR PROPERTY, SERIOUS PERSONAL INJURY OR DEATH. PROPER PRECAUTIONS AND SAFETY PROCEDURES SHOULD BE IMPLEMENTED PRIOR TO THE INSTALLATION AND OPERATION OF EQUIPMENT.
DLM $15/09/23
All your hydraulic needs in one place! Search products or browse categories below
Products on Hydraulic.Online are described and explained in non technical terms, with photos, charts and or videos. Most of our clients also tend to upgrade to more complete systems this is because they can pick up a phone and call us for a consultation. Call us and experience it for yourself! Australia +61 (07) 5563 1982.
(Hours 8am – 4pm Monday – Friday AEST, excludes National & QLD public holidays)