Flat Face Hydraulic Couplers 3/4" BSPP Male/Female Pair

3/4" Body x 3/4" BSPP Thread Flat-Face Couplers ISO16028 A SERIES

this sale is for one pair, ie: 1 x female 1 x male
Used extensively on all manner of Hydraulic machines, ISO16028 flat face couplers are the most common flat faces used. They have 3/4" BSPP Threads. It is easy to check compatibility. Please refer to our size charts in photos for correct sizing. The best measurement to use is 'J' column.
They are suitable for applications involving dusty or dirty environments and where oil loss on disconnection cannot be tolerated. This series of couplings are designed for use in excavator hammer and Auger circuits and other applications involving high pressure pulses. Construction plant, mobile equipment, general industrial, mining and agricultural.
These 3/4" flat face couplers are compatible with;
DNP PLT4, Stucchi FIRG/A Series, Faster 2FFI , Hansen QA, Ryco R110-06/08, Safeway FF49, Aeroquip FD89/FD49
Please refer to our size charts below for correct sizing. The best measurement to use is 'J' column.
3/4" BSPP Rated Working Pressure 350 Bar (5100 PSI)
100 LPM
Pressure drops less than 0.1 Bar @ 20 Litres / Minute
6 Bar @ 150 Litres / Minute
-20 to 100 degrees Celsius
Carbon steel body, treated to increase hardness and corrosion resistance, Nitrile seals. H Series couplings are Zinc plated.
750 g
Flat mating faces are easily wiped clean to prevent the ingress of contaminants.
Improved flow path minimises the pressure drop.
Non-spill design avoids fluid loss during connection and disconnection.
No air intrusion during connection.
Locking sleeve prevents accidental disconnection.
Zinc nickel surface treatment and meets 200 hour salt spray tests.
This Series conform to ISO 16028 (2006) in all respects
Connection / Disconnection Under Pressure

Connection with residual pressure in the lineFor applications where connection under pressure is required, HCP male couplings, or screw couplings from either the HSC, HS or RS ranges are recommended.

Email: hosefixersaustralia@gmail.com

Phone: 07 5563 1982
Hours: 8 am to 4 pm Monday - Friday, excluding public holidays
If you have any questions please don’t hesitate to contact us
Best regards,
Hydraulic.Online
Improper Selection, Installation, Implementation, And/Or Operation By Anyone Other Than Persons With Appropriate Technical And Mechanical Training Can Result In Damage To Equipment Or Property, Serious Personal Injury, Or Death. Proper Precautions And Safety Procedures Should Be Implemented Prior To The Installation And Operation Of Equipment.