Phone: (07) 5563 1982 | 1300 146 737

Select Page

Flat Face Hydraulic Couplers 5/8" Body, 3/4" BSPP Male/Female Pair

In stock
Product Details
Brand: Hydraulic.Online

Pair of 5/8" Body x 3/4" BSPP Thread Flat-Face Hydraulic Quick Connect Couplers ISO16028 A SERIES

  • This sale is for one pair, ie: 1 x female 1 x male
Used extensively on all manner of Hydraulic machines, ISO16028 flat face couplers are the most common type used.

Main Features

* They have a 5/8 " inch body and 3/4" BSPP female threads.
* Easy to Identify as the male has a 27 mm diameter. (see chart in images for other sizes)
* Oil flows up to 100 Lt/Min
* Pressures to 350 bar or 5100 psi
* Pressure drops less than 0.1 Bar @ 20 Litres / Minute
* 6 Bar @ 150 Litres / Minute
* Temperature -20 to 100 degrees Celsius
* Carbon steel body, Heat treated to increase hardness and corrosion resistance
* Nitrile seals. H Series couplings are Zinc plated.
* Weight 1050 g
* Flat mating faces are easily wiped clean to prevent the ingress of contaminants.
* Improved flow path minimises the pressure drop.
* Non-spill design avoids fluid loss during connection and disconnection.
* No air intrusion during connection.
* Locking sleeve prevents accidental disconnection.
* Zinc nickel surface treatment and meets 200 hour salt spray tests.

This Series conforms to ISO 16028 (2006) in all respects

Compatible with;
DNP PLT4, Stucchi FIRG/A Series, Faster 2FFI , Hansen QA, Ryco R110-06/08, Safeway FF49, Aeroquip FD89/FD49

It is easy to check compatibility. Please refer to our size charts in photos for correct sizing. The best measurement to use is 'J' column.
They are suitable for applications involving dusty or dirty environments and where oil loss on disconnection cannot be tolerated. This series of couplings are designed for use in excavator hammer and Auger circuits and other applications involving high pressure pulses. Construction plant, mobile equipment, general industrial, mining and agricultural.

Please refer to our size charts below for correct sizing. The best measurement to use is 'J' column.

Connection / Disconnection Under Pressure

Connection with residual pressure in the lineFor applications where connection under pressure is required, HCP male couplings, or screw couplings from either the HSC, HS or RS ranges are recommended.

Email: click here to email us

Phone: 1300 1 HOSES (1300 146 737) 07 5563 1982
Hours: 8 am to 4 pm Monday - Friday, QLD time excluding public holidays

If you have any questions please don’t hesitate to contact us
Best regards,

Improper Selection, Installation, Implementation, And/Or Operation By Anyone Other Than Persons With Appropriate Technical And Mechanical Training Can Result In Damage To Equipment Or Property, Serious Personal Injury, Or Death. Proper Precautions And Safety Procedures Should Be Implemented Prior To The Installation And Operation Of Equipment.

MM 26/01/2024 $ abc SEO, alt tags,feed

Save this product for later

All your hydraulic needs in one place! Search products or browse categories below

Products on Hydraulic.Online are described and explained in non technical terms, with photos, charts and or videos. Most of our clients also tend to upgrade to more complete systems this is because they can pick up a phone and call us for a consultation. Call us and experience it for yourself! Australia +61 (07) 5563 1982.

(Hours 8am – 4pm Monday – Friday AEST, excludes National & QLD public holidays)