Full electric 3 Spool Hydraulic Valve 90 LPM with Remote Control No Air required
This is a brand new high quality Italian made Galtech Q 75 3 spool ,
90Lpm valve full electrically operated valve complete with an remote control. No Air supply is required.
It is designed for Tilt Tray Trucks, Cranes. Skip Bin Trucks, Front end Loaders,
Backhoes or any application where you need to control 3 individual function via remote / electrics.
These valves are regularly used in hydraulic circuits to divert the flow of high pressure oil
and are typically used to control the speed and movement of hydraulic cylinders or motors.
Standard configuration is a double acting cylinder spool with 3 position,
spring return to centre lever. Also available with Motor spools. This valve has common UNO ports. To change to BSP ports adds $250 to the price.
Series Q75.
All sections on these Q-75 monoblock valves are double acting cylinder spools with a three position spring return kit c/w levers and adjustable main relief set at 150 Bar / 2100Psi standard.
Options also include full 12v/24v electrically operated. This valve with electric actuators, will be ready to hook up to a remote control unit.
Powerbeyond sleeve is optional, it gives the option to run a secondary (smaller flow) valve downstream,
by turning the 'T' port into a pressure port for additional valve to feed off.
– this allows it to carry through the high pressure.
When you assemble this sleeve, you would also have to remove the plug
on top of the valve block for use as a tank return line.
Technical Data
- 7/8" UNO service ports
- 7/8" UNO P Ports
- 1.1/16" UNO T Port
- Max Flow:90l/min
- Max Pressure:300 Bar
- Max Tank Pressure: 25 Bar
- Operating Temperature: -10°C + 80°C
- Construction = Monoblock
- Material of Construction = Steel
- No of Spools = 3
- Material of Construction = Case Hardened Steel
- O-rings made of NBR (Buna-N®)
- Max Flow Rate = 90 liters/min (20 Gallons per Minute)
- Max Working Pressure = 300 Bar (4500 PSI)
- Spool Type = Cylinder. Motor Spools also available, extra cost
- Spool Movement = Lever action, Spring Return to Center
- Built in Relief Valve = Adjustable (factory set at 2200 PSI)
- Dimensions. Please refer to photos,
- Ports Sizes
- Operating temperature range: -20 °C to + 80°C
-
Dimensions =
-
Weight 13 KG
- 7/8" UNO service ports
- 7/8" UNO P Ports
- 1.1/16" UNO T Port
- built in adjustable relief valve
- high performance,
- high efficiency,
- small volume,
- mass flow,
- leak resistance.
In additional to compact size, these control valves have fixed and large pull rods to control direction,
Installation ; As per photos, there are a choice of two pressure ports "P" (only use one), two "T"
Incorrectly attaching Pressure line to T port will crack the valve!
OUR EMAIL IS – HoseFixersAustralia@gmail.com
Additional information about us...
Tax invoices are supplied with every purchase
Emails will be answered within normal business hours (ie: 8.30am - 5.00pm M-F)
IMPROPER SELECTION, INSTALLATION, IMPLEMENTATION AND/OR OPERATION BY ANYONE OTHER THAN PERSONS WITH APPROPRIATE TECHNICAL AND MECHANICAL TRAINING CAN RESULT IN DAMAGE TO EQUIPMENT OR PROPERTY, SERIOUS PERSONAL INJURY OR DEATH. PROPER PRECAUTIONS AND SAFETY PROCEDURES SHOULD BE IMPLEMENTED PRIOR TO INSTALLATION AND OPERATION OF EQUIPMENT.
RL120523$
All your hydraulic needs in one place! Search products or browse categories below
Products on Hydraulic.Online are described and explained in non technical terms, with photos, charts and or videos. Most of our clients also tend to upgrade to more complete systems this is because they can pick up a phone and call us for a consultation. Call us and experience it for yourself! Australia +61 (07) 5563 1982.
(Hours 8am – 4pm Monday – Friday AEST, excludes National & QLD public holidays)