GALTECH Q75 ITALIAN Flow Control Valve 2-Spool 80 LPM FULL ELECTRIC
This is a brand new high quality Italian made Galtech Q 75 1 spool , 80Lpm valve full electrically operated valve. It is designed for Tilt Tray Trucks, Cranes. Skip Bin Trucks, Front end Loaders, Backhoes or any application where you need to control 2 individual function or cylinder.
Standard configuration is a double acting cylinder spool with 3 position, spring return to centre lever. Also available with Motor spool.
All sections on these Q-75 monoblock valves are double acting with a three position spring return kit c/w levers and adjustable main relief (81-200 Bar as standard) set at 150 Bar / 2100Psi standard.
Options also include full 12v/24v electrically operated.
Powerbeyond sleeve, gives the option to run a secondary (smaller flow) valve downstream, by turning the 'T' port into a pressure port for additional valve to feed off. With the power beyond sleeve, they are assembled onto the “tank” port of the valve – this allows it to carry through the high pressure. When you assemble this sleeve, you would also have to remove the plug on top of the valve block for use as a tank line.
- 1/2" BSP service ports
- 1/2" BSP P Ports
- 3/4" Bspp T Port
- Max Flow:90l/min
- Max Pressure:300 Bar
- Max Tank Pressure: 25 Bar
- Operating Temperature: -10°C + 80°C
- Construction = Monoblock
- Material of Construction = Steel
- No of Spools = 2
- Material of Construction = Case Hardened Steel
- O-rings made of NBR (Buna-N®)
- Max Flow Rate = 90 liters/min (20 Gallons per Minute)
- Max Working Pressure = 300 Bar (4500 PSI)
- Spool Type = Cylinder. Motor Spools also available
- Spool Movement = Lever action, Spring Return to Center
- Built in Relief Valve = Adjustable (factory set at 2200 PSI)
- Dimensions. Please refer to photos,
- Ports Sizes
- Pressure Port 1/2" BSPP
- Cylinder Ports 1/2" BSPP
- Tank Port 3/4" BSPP
- Operating temperature range: -20 °C to + 80°C
- Dimensions =
- Weight 6 KG
- built in adjustable relief valve
- high performance,
- high efficiency,
- small volume,
- mass flow,
- leak resistance.
In additional to compact size, these control valves have fixed and large pull rods to control direction,
Installation ; As per photos, there are a choice of two pressure ports "P" (only use one), two "T"
OUR EMAIL IS – HoseFixersAustralia@gmail.com
Additional information about us...
Tax invoices are supplied with every purchase
Emails will be answered within normal business hours (ie: 8.30am - 5.00pm M-F)
IMPROPER SELECTION, INSTALLATION, IMPLEMENTATION AND/OR OPERATION BY ANYONE OTHER THAN PERSONS WITH APPROPRIATE TECHNICAL AND MECHANICAL TRAINING CAN RESULT IN DAMAGE TO EQUIPMENT OR PROPERTY, SERIOUS PERSONAL INJURY OR DEATH. PROPER PRECAUTIONS AND SAFETY PROCEDURES SHOULD BE IMPLEMENTED PRIOR TO INSTALLATION AND OPERATION OF EQUIPMENT.
All your hydraulic needs in one place! Search products or browse categories below
Products on Hydraulic.Online are described and explained in non technical terms, with photos, charts and or videos. Most of our clients also tend to upgrade to more complete systems this is because they can pick up a phone and call us for a consultation. Call us and experience it for yourself! Australia +61 (07) 5563 1982.
(Hours 8am – 4pm Monday – Friday AEST, excludes National & QLD public holidays)