Phone: (07) 5563 1982 | 1300 146 737

Select Page

GATES CR2 100m Hydraulic Hose SAE100R2AT 2 Wire 1/4", 3/8" 1/2" and 3/4"

H-R2-04-100-GATES
AU$887.95
In stock
1
Product Details
Brand: GATES

Gates CR2 Pro Series 2 Wire

EN 853 2SN / SAE R2AT Two Wire Hydraulic Hose
Sizes 1/4", 3/8" & 1/2" in 100 metre coils

Compatible with both crimp on tails & reusable hose ends


Size ID (inch) ID (mm) OD (mm) Max. Working Pressure Burst Pressure Bend Radius
100R2AT-04 1/4" 6.4 mm 15.1mm 5,800 PSI 400 BAR 23,200 PSI 1600 Bar 100 mm
100R2AT-06 3/8" 9.5 mm 16.7mm 4,800 PSI 330 BAR 19,200 PSI 1320 Bar 130 mm
100R2AT-08 1/2" 12.7 mm 22.2mm 4,000 PSI 276 BAR 16,000 PSI 1103 Bar 200 mm
100R2AT-12 3/4" 19 mm 30 mm 3,100 PSI 215 Bar 12,400 psi 860 Bar 240 mm

Gates
Gates is CR2 Hydraulic hose is a non-skive and is compatible to German EN 853 2SN specifications
as well as American SAE 100 R2 AT
Two-Wire Hydraulic Hose is compatible with all standard crimp-on and field fit fittings.
Please contact us for detailed and accurate crimp dimensions


EATON GH195 AQP HI-IMPULSE hoses
MANULI FLUICONNECTO 2SN FL2T04 FL2T06 FL2T08 FL2T12

PIRTEK SAE 100R2AT,
SIZES R2AT-04, R2AT-06, R2AT-08, R2AT-12.

TOTAL RUBBER SUNFLEX SAE 100 R2AT EN 853 2SN,
SIZES HYD-R2T-04-SF-S, HYD-R2T-06-SF-S, HYD-R2T-08-SF-S, HYD-R2T-12-SF-S.

RYCO AVENGER SIZES, T24A, T26A, T28A, T212A and
RYCO DIEHARD SIZES, T24D T26D T28D AND T212D Non-Skive Hoses.


TWO WIRE HOSE FOUR MOST COMMON HYDRAULIC HOSE BORE SIZES ARE
AS FOLLOWS.,
100R2AT 1/4" DN6,
100R2AT 3/8" DN10,
100R2AT 1/2" DN12,
100R2AT 3/4" DN19


ALL THE Hoses listed above can also be used with the following branded hose fittings with the following part numbers.
Our own ENGMATTEC 2 PIECE HOSE TAILS AND FERRULES ARE
AVAILABLE FOR BOTH One (1) AND Two (2) WIRE BRAIDED HOSE IN
04 - ¼”a, 06 - ⅜”, 08 - ½”,12 - ¾” and 1” - 16.

FOR EXAMPLE, THE FOLLOWING SIZES AND THREAD TYPES ARE AVAILABLE
JIC FEMALE AND MALE HOSE TAILS SIZES, E12JF, E12JM,
BSP FEMALE AND MALE HOSE TAILS SIZES, E12BF, E12BM

ORFS Female Straight 45 and 90 elbows

ALL AVAILABLE WITH OUR OWN EngMatTec Crimp on NO SKIVE Ferrules
IN THE FOLLOWING SIZE ENP-R2-12 (¾”)
Contact us for stock and or Crimp Dimensions.

Please note for lengths greater than 20m one or more cuts may be used to make up the full length,
please let us know if you require a continuous length and we will do our best to accommodate

https://www.hydraulic.onlie


also compatible with the following hydraulic hose fittings.
Ryco bitelok one-piece crimp non-skive t200 and t700 hose tails.

Eaton TTC / z series braided hose one-piece "bite the wire" style hose fittings.

Southcott super crimp s series stems with fnp-04, fnp-06, fnp-08, fnp-12 ferrules

As well as ezi-crimp non-skive one piece series e fittings.

Child field fit couplings series RMB, rfb, rmj, rfj, with bn2-12 non-skive bodies.

Ryco field attachable l00 series loo-12 ferrules and 600 series inserts.

Taipan K series one piece non-skive hose tails
K12JF, K12JM and K12BF, K12BM or
field attachable D series eg D12 tails and D2 series bodies eg D2-12 body.

Construction
Synthetic rubber inner tube with two layers of braided high tensile steel wire reinforcement
and a wrapped, oil, ozone, weather, and abrasion-resistant synthetic rubber outer cover.

Typical Compatible Applications
High-pressure service with petroleum base hydraulic fluids, Hot and Cold water, water-glycol, water-oil,
Compressed Air, Fire-resistant hydraulic fluids, hot oil grease, lubricants,
Crude and fuel oils. For air applications above 100 psi, the cover should be pin pricked.

Need another hose size, field fit reusable fittings couplers, and or adaptors for your application?
Just contact us on (07) 5571 6155, (07) 5563 1982

MM 30/8/2023 Chart abc

Save this product for later

All your hydraulic needs in one place! Search products or browse categories below

Products on Hydraulic.Online are described and explained in non technical terms, with photos, charts and or videos. Most of our clients also tend to upgrade to more complete systems this is because they can pick up a phone and call us for a consultation. Call us and experience it for yourself! Australia +61 (07) 5563 1982.

(Hours 8am – 4pm Monday – Friday AEST, excludes National & QLD public holidays)

https://www.youtube.com/watch?v=jpHhaZJd4IE