Gates 100m Coil Hydraulic Hose SAE100R2AT 2 Wire 1/4", 3/8" & 1/2"

Gates CR2 Pro Series 2 Wire

Gates
Our non-skive EN 853 2SN / SAE R2AT Two-Wire Hydraulic Hose is compatible with all standard crimp-on and field fit fittings.
Please contact us for detailed and accurate crimp dimensions

GATES 4G2, 6G2, 8G2, 12G2 and GATES High-Temperature 4G2H, 6GTH, 8G2H, 12G2H
EATON GH195 AQP HI-IMPULSE hoses
MANULI FLUICONNECTO 2SN FL2T04 FL2T06 FL2T08 FL2T12
MANULI FLUICONNECTO ROCKMASTER 2SC H01030006 H01030010, H01030012, H01030019 (DOUBLE THIS HOSE’S BEND RADIUS, SLIGHTLY LESS WEAR RESISTANCE)
PARKER 301SN - 4, -6, -8, -12 NON SKIVE HOSE.
PIRTEK SAE 100R2AT,
SIZES R2AT-04, R2AT-06, R2AT-08, R2AT-12.
TOTAL RUBBER SUNFLEX SAE 100 R2AT EN 853 2SN,
SIZES HYD-R2T-04-SF-S, HYD-R2T-06-SF-S, HYD-R2T-08-SF-S, HYD-R2T-12-SF-S.
RYCO AVENGER SIZES, T24A, T26A, T28A, T212A and
RYCO DIEHARD SIZES, T24D T26D T28D AND T212D Non-Skive Hoses.
TWO WIRE HOSE FOUR MOST COMMON HYDRAULIC HOSE BORE SIZES ARE
AS FOLLOWS.,
100R2AT 1/4" DN6,
100R2AT 3/8" DN10,
100R2AT 1/2" DN12,
100R2AT 3/4" DN19
ALL THE Hoses listed above can also be used with the following branded hose fittings with the following part numbers.
Our own ENGMATTEC 2 PIECE HOSE TAILS AND FERRULES ARE
AVAILABLE FOR BOTH One (1) AND Two (2) WIRE BRAIDED HOSE IN
04 - ¼”a, 06 - ⅜”, 08 - ½”,12 - ¾” and 1” - 16.
FOR EXAMPLE, THE FOLLOWING SIZES AND THREAD TYPES ARE AVAILABLE
JIC FEMALE AND MALE HOSE TAILS SIZES, E12JF, E12JM,
BSP FEMALE AND MALE HOSE TAILS SIZES, E12BF, E12BM
ALL AVAILABLE WITH OUR OWN Engmattec Crimp on NO SKIVE Ferrules
THEY ARE AVAILABLE IN THE FOLLOWING SIZE ENPR212 (¾”)
Contact us for stock AND or Crimp Dimensions.
Please note for lengths greater than 20m one or more cuts may be used to make up the full length, please let us know if you require a continuous length and we will do our best to accommodate
https://www.hydraulic.online/store/

also compatible with the following hydraulic hose fittings.
Ryco bitelok one-piece crimp non-skive t200 and t700 hose tails.
Eaton TTC / z series braided hose one-piece "bite the wire" style hose fittings.
Southcott super crimp s series stems with fnp-04, fnp-06, fnp-08, fnp-12 ferrules as well as ezi-crimp non-skive one piece series e fittings.
Child field fit couplings series RMB, rfb, rmj, rfj, with bn2-12 non-skive bodies.
Ryco field attachable l00 series loo-12 ferrules and 600 series inserts.
Taipan k series one piece non-skive hose tails
k12jf, k12jm and k12bf, k12bm or
field attachable d series eg d12 tails and d2 series bodies eg d2-12 body.
The picture is of a hose of similar construction hose and appearance.
Construction
synthetic rubber inner tube with two layers of braided high tensile steel wire reinforcement and a wrapped, oil, ozone, weather, and abrasion-resistant synthetic rubber outer cover.
Application
high-pressure service with petroleum base hydraulic fluids, water, air, water-glycol, water-oil, fire-resistant hydraulic fluids, hot oil grease, lubricants, crude, and fuel oils. For air applications above 100 psi, the cover should be pin pricked.
Need another hose size, field fit reusable fittings couplers, and or adaptors for your application?
Just contact us on (07) 5571 6155, (07) 5563 1982