Phone: (07) 5563 1982 | 1300 146 737

Select Page


In stock
Product Details

    Certified Australian-made with a 2 year warranty

    This is an All Steel Double Acting Hydraulic Cylinder with 2.0-inch diameter Bore and Piston.

    1.25-inch diameter Hard Chrome Rod and Female Clevis with a 1-inch pin on both ends.

    Producing 4.2 tons push force at 3000 PSI Extending.

    3.0 tons at 3000 PSI Pull force retracting.

    Can be also be used as single-acting ram (ie. gravity pull or push down).

    Made with DUAL 9/16" UNO ports at each end to allow more options to connect up in tight spots.

    Buy with Confidence from a long established Hydraulic Service Center get an Australian Tax Invoice and 2 Year Warranty.

    WARNING: Hydraulic cylinders without a hose burst valve, pilot operated check valve or counter balance valve directly mounted to the cylinder will not meet Australian Standard AS1418.8, nor occupational health & safety rules.
    • 2.0" 50.8mm Bore
    • 1.25" Rod (31.75 mm)
    • stroke from 4 to 54 inches (102 mm to 1371 mm) Longer and custom lengths available on request
    • Port Sizes 9/16" UNO
    • 1" Female clevis with 1" High Tensile steel Pin with R Clips on each end
    • Weight 8 kg for 4" stroke to 27 KG for 48" stroke
    • Force on Extend @3000 PSI is 4.2 Metric Tonne or 1.4 Tonne Per 1000 PSI
    • Force on Retract @3000 PSI is 2.4 Metric Tonne or 0.83 Tonne Per 1000 PSI

    Materials of Construction

    • Steel Barrel, Gland Nut and Clevis
    • Hard Chromed High tensile Steel Rod
    • High tensile steel pins
    • Spring Steel R Clip pin retainers
    • Max Working Pressure = 240 Bar (3500 PSI) 4.95 Tonne Force.

    We can supply cylinders in many bore, stroke and Port Orientations.
    Please send us a question via eBay for different size cylinders and costings.
    Many types of adaptors threads, hydraulic hose and field fit hose fittings available please see our other listings.
    Unlike imported cylinders, these are a robust construction with precise tolerances meant for use day in and day out in Australia's harshest conditions.
    Each Cylinder is individually Oil Tested at the Factory and comes with a
    Also Available are Re-Seal kits.
    Designed for many hydraulic applications in industry, manufacturing and transport and farming and can be used in Tilt Tray and Skip Bin Trucks, Front end Loaders, Backhoes, Tractors, Farm Implements and Log Spliters.
    Comes complete with a Female Clevis at each end.

    Please email or call us on (07) 5571 6155 with your post code for freight confirmation.

    Our postcode is 4211 NERANG,
    This item weighs between 7 and 27 KG

    Freight; Available for pick up from Brisbane or Melbourne. We will do best freight price we can, however some of these a over 25 kg, requiring pallets etc. If you are in a remote area, freight can be costly. If this applies to you, we will call & discuss options with you.

  • Please call 07 5563 1982 or 07 5571 6155 or send us a question via email to for different size cylinders and costings.
Many types of adaptors threads, hydraulic hose and field fit hose fittings are available please see our other listings.
As an estimate, we can send depot to depot in most states for approx. $25. Postage Varies,
For your own estimate try; or
Our postcode is 4214 Molendinar,

Contact us at;

Tel 07 5563 1982

$RL 19.12.19
Save this product for later

All your hydraulic needs in one place! Search products or browse categories below

Products on Hydraulic.Online are described and explained in non technical terms, with photos, charts and or videos. Most of our clients also tend to upgrade to more complete systems this is because they can pick up a phone and call us for a consultation. Call us and experience it for yourself! Australia +61 (07) 5563 1982.

(Hours 8am – 4pm Monday – Friday AEST, excludes National & QLD public holidays)