HYDRAULIC HOSE ASSEMBLIES 1/2" CRIMPED ENDS BSP, JIC, TWO WIRE 4000 PSI

Hydraulic hose with crimped ends Custom made to your needs
This sale is for a 1/2" Hydraulic Two Wire 4000 psi hydraulic hose complete with crimped-on ends. It is available with either JIC 3/4", 7/8" JIC, or 1/2" BSP female swivel or male ends crimped onto the length of your choice, or Size & end options are in the price box.

If you would like a specific length made & crimped, please buy the closest size(must be longer than you need) & message us with the overall length required.
Always measure from the very end of the fittings on both ends ( OA )As per photos. Please see the thread charts if unsure of the thread. Best to measure the Male thread OD
Please Be Aware that when selecting 90° for both ends end #2 will be a straight tail AND an adaptor to allow for correct orientation when fitting
Application
Construction Synthetic rubber tube: two braids of special high tensile steel wire reinforcement separated by synthetic rubber layer; oil, weather, and abrasion resistant synthetic rubber outer cover. Application Medium to High-Pressure hydraulic lines. Suitable for petroleum-based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water glycol-based fluids, and air. For air applications above 100psi, the cover should be pin pricked. Range of Temperature -40˚C to +100˚C Couplings 275 Bar, 4200psi

Please send us a message for more information.
Email: hosefixersaustralia@gmail.com

Phone: 07 5563 1982
Hours: 8 am to 4 pm Monday - Friday, excluding public holidays
If you have any questions please don’t hesitate to contact us
Best regards,
Hydraulic.Online
Improper Selection, Installation, Implementation, And/Or Operation By Anyone Other Than Persons With Appropriate Technical And Mechanical Training Can Result In Damage To Equipment Or Property, Serious Personal Injury, Or Death. Proper Precautions And Safety Procedures Should Be Implemented Prior To The Installation And Operation Of Equipment.