Phone: (07) 5563 1982 | 1300 146 737

Select Page

Hydraulic Gerolor Motor BMPH Series, Danfoss OMP, DH, EATON H, M+S MP, PARKER TC, WHITE WP,WD

In stock
Product Details
Brand: Zhenjiang Hydraulics
UPC: Does not apply


Available in sizes ; 36cc to 400 Per Revolution

These are high quality ZHENJIANG made hydraulic Gerolor Motors.
These hydraulic motors are suitable for many low-speed applications i.e. eliminating gears, shafts, chains, belts, pulleys and other speed reduction components.

Low weight with hight torque:
All motors are compact and light in weight in proportion to the torque and power delivered, they are all fully reversible.
These motors are useful where space is tight, high torque & low speed are required.
These motors are equivalent to these manufacturers:


Manufactured to fine tolerances:
Hydraulics demands extremely fine tolerances & quality materials.
ZHENJIANG has been producing tight tolerance hydraulic motors for over 20 years.
We offer a 12-month warranty with the purchase of these motors.

Common UNO Ports:
These Gerolor motors come with A and B Ports in 7/8” UNO and a 7/16” UNO Drain port.

High load Needle bearings + 200 Bar shaft seals

We are a functioning hydraulic service center, so feel free to call with any questions or message us for prices on hydraulic adaptors and other items.

If you are unsure about identifying your pump, please clean & send a photo of the numbers and letters stamped in the body and nameplate of the pump. Optionally send a photo with the length, width, bolt hole and centre dimensions.

Please refer to the chart in the photos for dimensions, shafts ports etc.

Seal kits are available for just $68.

Postage is a $25 flat rate

Tax invoices are supplied with every purchase

Call us on 07 5563 1982 or email us by clicking here
Messages will be answered within normal business hours (ie: 8.00 AM - 4.00 PM Monday -Friday QLD Time)

DM$ 07/02/23
MM 19/01/2024 abc,
MM 29/01/2024 feed price

DM 22/04/24

Save this product for later

All your hydraulic needs in one place! Search products or browse categories below

Products on Hydraulic.Online are described and explained in non technical terms, with photos, charts and or videos. Most of our clients also tend to upgrade to more complete systems this is because they can pick up a phone and call us for a consultation. Call us and experience it for yourself! Australia +61 (07) 5563 1982.

(Hours 8am – 4pm Monday – Friday AEST, excludes National & QLD public holidays)