Hydraulic Hose 1/2" 2 Wire 100 M SAE100R2AT-08 4000 PSI

100 Meter Roll of 1/2" Heavy Duty Hydraulic Hose 1/2 inch Inside diameter reinforced with Two layers of high tensile braided Steel Wire with a 4000 PSI (275 bar) Working Pressure

This is a high quality ENGMATTEC hose made in Europe. Made to meet or exceed U.S SAE100R2AT (Society Of Automotive Engineers) Specifications as well as German EN 853 Standards.

ENGMATTEC 100R2AT 1/2" DN12 Hose is also fully compatible, interchangeable and or as a direct replacement for the follow brands of hose.

• RYCO AVENGER T28A and RYCO DIEHARD T28D Non-Skive Hoses.
• GATES 8G2 and 8G2H
• EATON GH195 AQP HI-IMPULSE hoses
• PARKER 301SN-8 NON SKIVE HOSE
• MANULI FLUICONNECTO 2SN FL2T08
• MANULI FLUICONNECTO ROCKMASTER 2SC H01030012 (DOUBLE THIS HOSE’S BEND RADIUS, SLIGHTLY LESS WEAR RESISTANCE)

• PIRTEK SAE 100R2AT, SIZES R2AT-08.
• TOTAL RUBBER SUNFLEX SAE 100 R2AT EN 853 2SN, SIZE HYD-R2T-08-SF-S
• .ENGMATTEC 100R2AT 1/2" DN12 Hose can also be used with the following hose fittings
• RYCO BITELOK ONE-PIECE CRIMP NON SKIVE T200 AND T700 hose tails
• EATON TTC / Z Series braided hose one-piece bite the wire style hose fittings.
• Southcott Super Crimp S series stems with FNP-08 ferrules as well as Ezi-Crimp Non Skive One Piece Series E fittings.
• CHILD FIELD FIT COUPLINGS Series RMB, RFB, RMJ, RFJ, with BN2-08 non skive Bodies.
• RYCO FIELD ATTACHABLE L SERIES L00-08 FERRULES and 600 SERIES INSERTS.
• TAIPAN 100R2GP-08AHF and 100R2-08AHF hose and K06 series one piece non skive hose tails and or Field Attachable D08 Tails and D2-08 Bodies

This hose is Certified to work without failure a minimum of 200,000 Impulse Cycles (equivalent to almost 1000 excavator earth moving hours) at 133% of maximum pressure (5320 psi) and at 100% of maximum temperature 120 °C.

We have used this same hose extensively in our hydraulic service trucks , & on new builds. It has a great tough outer case, yet is very flexible for ease of fitting. This hose is a quality high specification hydraulic hose, branded ENGMATTEC ®

# Please note, Freight is NOT Free, we will price up cheapest freight for you & send you a quote. This hose is heavy and must be sent on a pallet, extra freight charges may apply. We ship at cost price and do not profit from freight charges.

Construction

Synthetic rubber inner tube with Two layers of braided high tensile steel wire reinforcement and a wrapped, Oil, Ozone, Weather and Abrasion Resistant synthetic rubber outer cover.

Application

High pressure service with petroleum base hydraulic fluids, water, Air, Water-glycol, water-oil, fire resistant hydraulic fluids, hot oil grease, lubricants, crude and fuel oils. For air applications above 100 PSI the cover should be pin pricked.

Need another hose size, field fit reusable fittings couplers and or adaptors for your application?

Just send us a message with any questions you may have.

Specifications

Pressure Range

Working Pressure: 4000 PSI

Burst Pressure: 16000 PSI (Minimum)

Range of Temperature

-40⁰C to + 120⁰C

Minimum Bend Radius

180mm

Weight

0.63 KG/Mtr

Freight

Please contact us for a more competitive shipping quote.

We are able to send freight from depot to dept at a cheaper rate.

26.10.20 $RL