Hydraulic Hose 1/2" Two Wire 50 Meters SAE100R2-08 MSHA EUROPEAN MADE 4040 PSI

SKU R2-08 x 50
AU$361.00
In stock
1
Product Details

HYDRAULIC HOSE 1/2" ID Two Wire Braided 4000 PSI Working Pressure 50 Meter Coil

This is a high quality EngMatTec ® hose made in Europe. Made to SAE (Society Of Automotive Engineers) Specifications.

ENGMATTEC 100R2AT 1/2" DN12 Hose is also fully compatible, interchangeable and or as a direct replacement for the following brands of Hydraulic 2 wire hose.

  • RYCO AVENGER T28A and RYCO DIEHARD T28D Non-Skive Hoses.
  • GATES 8G2 and 8G2H
  • EATON GH195 AQP HI-IMPULSE hoses
  • MANULI FLUICONNECTO 2SN FL2T08.
  • MANULI FLUICONNECTO ROCKMASTER 2SC H01030006 H01030010, H01030012, H01030019 (DOUBLE THIS HOSE’S BEND RADIUS, SLIGHTLY LESS WEAR RESISTANCE).
  • PARKER 301SN - 4, -6, -8, -12 NON SKIVE HOSE.

  • PIRTEK SAE 100R2AT, SIZES R2AT-08.
  • TOTAL RUBBER SUNFLEX SAE 100 R2AT EN 853 2SN, SIZE HYD-R2T-08-SF-S
  • ENGMATTEC 100R2AT 1/2" DN12 Hose can also be used with the following hose fittings
  • RYCO BITELOK ONE-PIECE CRIMP NON SKIVE T200 AND T700 hose tails
  • EATON TTC / Z Series braided hose one-piece bite the wire style hose fittings.
  • Southcott Super Crimp S series stems with FNP-08 ferrules as well as Ezi-Crimp Non Skive One Piece Series E fittings.
  • CHILD FIELD FIT COUPLINGS Series RMB, RFB, RMJ, RFJ, with BN2-08 non skive Bodies.
  • RYCO FIELD ATTACHABLE L SERIES L00-08 FERRULES and 600 SERIES INSERTS.
  • TAIPAN 100R2GP-08AHF and 100R2-08AHF hose and K08 series one piece non skive hose tails and or Field Attachable D08 Tails and D2-08 Bodies.

We have used this same hose extensively in our hydraulic service trucks , & on new builds. It has a great tough outer case, yet is very flexible for ease of fitting. This hose is a quality product, beware of inferior Chinese hose.

This hose is Certified to work without failure a minimum of 200,000 Impulse Cycles (equivalent to almost 1000 excavator earth moving hours) at 133% of maximum pressure (4820 psi) and at 100% of maximum temperature 120 °C.

SAE 100R2 – 08 NON SKIVE HOSE (Two Wire)

Construction

Synthetic rubber inner tube with Two layers of braided high tensile steel wire reinforcement and a wrapped, Oil, Ozone, Weather and Abrasion Resistant synthetic rubber outer cover.

Application

High pressure service with petroleum base hydraulic fluids, water, Air, Water-glycol, water-oil, fire resistant hydraulic fluids, hot oil grease, lubricants, crude and fuel oils. For air applications above 100 PSI the cover should be pin pricked.

# Please note, shipping rates are based on Australia Post calculator. If your delivery address is in a major centre we can use couriers at a better rate. Feel free to email or call for a freight quote.

Need another hose size, field fit reusable fittings couplers and or adaptors for your application?

Just send us a message with any questions you may have.

Specifications

Pressure Range

Working Pressure: 4040 PSI

Burst Pressure: 16000 PSI (Minimum)

Range of Temperature

-40⁰C to + 120⁰C

Minimum Bend Radius

180mm

Weight

0.63 KG/Mtr

Freight

Please contact us for a more competitive shipping quote.

We are able to send freight from depot to dept at a cheaper rate.

hosefixersaustralia@gmail.com075563192

Please send us a message for any questions you may have.

Best regards,
Hydraulic.Online

26.10.20 $RL

Save this product for later

All your hydraulic needs in one place! Search products or browse categories below

Products on Hydraulic.Online are described and explained in non technical terms, with photos, charts and or videos. Most of our clients also tend to upgrade to more complete systems this is because they can pick up a phone and call us for a consultation. Call us and experience it for yourself! Australia +61 (07) 5563 1982.

(Hours 8am – 4pm Monday – Friday AEST, excludes National & QLD public holidays)

https://www.youtube.com/watch?v=jpHhaZJd4IE