Call now: (07) 5563 1982

Hydraulic Hose 3/8" 2 Wire 100 M Roll SAE100R2 5000 PSI

100R2AT 06 x 100
Out of stock
Product Details

HYDRAULIC HOSE 3/8" ID Two Wire 330 BAR (4800 PSI) Working Pressure 100 Meter Reel.

Manufactured to meet or exceed US SAE100R2AT and German EN 853 Specifications and Standards.

Certified MSHA (Mine Safety Health Administration) to be Flame Resistant and Anti Static.

This high quality ENGMATTEC® Hydraulic Hose is manufactured in Europe. Have piece of mind fitting a proven high quality hose which not 'mushroom' when cut (making it easy to fit hose ends) & will last. Rated for temperatures of -40° C to +120°C

Manufactured from Synthetic rubber, two layers of braided high tensile steel wire reinforcement and a wrapped, Oil, Ozone, Weather and Abrasion Resistant synthetic rubber outer cover. We have used this same hose for over 10 years in our hydraulic service trucks as well as on new builds. It has a great tough outer case, yet is very flexible for ease of fitting.


Please contact us with your address/postcode for a freight quote. We only charge what freight actually costs. Weight & dimensions are; 51 KG , 48cm x 42 cm x 42 cm


High pressure service with petroleum base hydraulic fluids, water, Air, Water-glycol, water-oil, fire resistant hydraulic fluids, hot oil grease, lubricants, crude and fuel oils. For air applications above 100 PSI the cover should be pin pricked.

Need another hose size, field fit reusable fittings, Crimp on fittings, couplers and or adaptors for your application?


Pressure Range

Working Pressure: 4890 PSI

Burst Pressure: 16000 PSI (Minimum)

Range of Temperature

-40⁰C to + 120⁰C

Minimum Bend Radius



0.48 KG per mt

The cheapest freight is generally through these carriers. Either door to door or 'depot to depot'. Our post code is 4214, Molendinar.
You can obtain a 'estimate'* from us by sending a message with delivery address.
*we will need to also check & send through freight charge

Additional information about us...

Tax invoices are supplied with every purchase

Messages will be answered within normal business hours (ie: 8.30am - 5.00pm M-F) 0755631982

Best regards,

*** Please note for lengths greater than 20m one or more cuts may be used to make up the full length, please let us know if you require a continuous length and we will do our best to accomodate ***

Save this product for later

All your hydraulic needs in one place! Search products or browse categories below

Products on Hydraulic.Online are described and explained in non technical terms, with photos, charts and or videos. Most of our clients also tend to upgrade to more complete systems this is because they can pick up a phone and call us for a consultation. Call us and experience it for yourself! Australia +61 (07) 5563 1982.

(Hours 8am – 4pm Monday – Friday AEST, excludes National & QLD public holidays)