Phone: (07) 5563 1982 | 1300 146 737

Select Page

Custom Hydraulic Hoses 1/4" Two Wire 5,800 psi Crimped Ends BSP, JIC, or ORFS

In stock
Product Details

Custom Hydraulic Hose Assembly made from 1/4" 5,800 psi (400 bar) Two Wire hose with crimped on hose fittings in BSP, JIC, or ORFS

Made to your exacting needs such as length, thread type, and quantity.
This listing is for a 1/4" 5,800psi (400 bar) two-wire hydraulic hose complete with crimped-on ends.

The custom hose assembly is available with either

JIC 7/16" or 9/16" Female swivel nut or Male hose tail or a 90-degree swept bend elbow or,

1/4" or 3/8" BSP. Female swivel nut or taper Male hose tail or a 90-degree swept bend elbow or,

9/16 or 11/16 ORFS Female swivel nut or Male hose tail or a 90-degree swept bend elbow

Please note that if you require 90 degree elbows at each end: of the hose, one end will be a one piece swept bend elbow and the other end will be made of a straight female and a Male / Female 90 degree elbow. This is to allow you easy installation in the field and to also obtain the correct angular orientation.

Hose fittings used will either be Two piece crimp / swage on type.
Assembled and crimped to the length of your choice.
Threads sizes & Hose tail end options are in the price box.

If you would like a specific length made please buy the closest size
(must be longer than you need) & message us with the overall exact length required.
Always measure from the very end of the fittings on both ends ( OA = Overall length) as per photos.
We also have straight, 45°, and 90° adaptors in our other listings.

Click here to view our range of available adaptors and elbows

Please see the thread charts if unsure of the thread.
Note for accuracy it is always better to measure the OD of the Male thread.

Hose Construction
Synthetic rubber tube: two braids of special high tensile steel wire reinforcement separated by synthetic rubber layer; oil, weather and abrasion resistant synthetic rubber outer cover.

Medium to High-Pressure hydraulic lines. Suitable for petroleum-based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water glycol-based fluids, and air. For air applications above 100 psi, the cover should be pin pricked.
Range of Temperature -40˚C to +100˚C Couplings

Email: Please click here to email us with your custom hose requirements and or questions

Phone: 07 5563 1982 or 1300 1 HOSES

Hours: 8 am to 3.45 pm Monday - Friday, QLD time excluding public holidays
If you have any questions please don’t hesitate to contact us
Best regards,

Improper Selection, Installation, Implementation, And/Or Operation By Anyone Other Than Persons With Appropriate Technical And Mechanical Training Can Result In Damage To Equipment Or Property, Serious Personal Injury, Or Death. Proper Precautions And Safety Procedures Should Be Implemented Before The Installation And Operation Of Equipment.

MM 22/04/2024 $ pic, abc, options, feed, related

Save this product for later

All your hydraulic needs in one place! Search products or browse categories below

Products on Hydraulic.Online are described and explained in non technical terms, with photos, charts and or videos. Most of our clients also tend to upgrade to more complete systems this is because they can pick up a phone and call us for a consultation. Call us and experience it for yourself! Australia +61 (07) 5563 1982.

(Hours 8am – 4pm Monday – Friday AEST, excludes National & QLD public holidays)