Hydraulic Oil Spin On Suction Side Filter Assembly 3/4" 100lt/Min Or 1-1/4" Bsp 300lt/Min

The suction side filter unit

Hydraulic equipment is generally used and operated in some of the harshest environments around and if damaged they are expensive to replace. The Long term reliability of hydraulic equipment is greatly enhanced if the Hydraulic Oil is continuously filtered.
This is a Suction side filter unit. The head units (3/4" or 1-1/4" Bsp ) come with a Vacuum clog gauge. 0 - 30Hg. The filters are 90 um mesh units allowing for flows of 100Lpm & 300Lpm respectively. This Filter assembly is a Quality item and is manufactured using the latest Filtration materials and technology by FaiFiltri Italy.
Please note; most hydraulic systems only require RETURN filtration. Suction side filtration can affect clear oil suction to your pumps, ie can cause cavitation leading to premature wear. Ensure the highest flow possible to your pump
Aluminium Alloy Filter Head complete with Vacuum visual gauge plus a "Clogged filter" internal bypass set at 5 PSI and Buna "N" O ring seal,
Filter Head Inlet and Outlet ports are either 3/4" or 1-1/4" BSPP.
On the top of the Filter Head are two M10 x 1.5 threaded holes 38 mm apart for mounting the filter assembly to a bracket or machine framework.
Max Oil Flow Rate for 3/4", 90 microns 100 liters / Minute ( 24US GPM)
Max Oil Flow Rate for 1-1/4" 90 microns 300 liters / Minute ( 72 US GPM)
Ports; 3/4" BSPP or 1-1/4" BSPP
Max Operating Pressure 12 Bar (174 PSI)
Max Differential pressure 4 Bar (58 PSI)
Burst Pressure 25 Bar (363 PSI)
Filter head internal Bypass Pressure 5 PSI
Filter media = inorganic, impregnated resin-bonded microfibers supported upstream and downstream.
Operating Temperature -25 to +110 degrees C
Filtered Media = Suitable with All Mineral Oils, Fuels, Glycol/Water solutions, and Most Synthetic oils.

Email: hosefixersaustralia@gmail.com
Phone: 07 5563 1982
Hours: 8 am to 4 pm Monday - Friday, excluding public holidays
If you have any questions please don’t hesitate to contact us
Best regards,
Hydraulic.Online
Improper Selection, Installation, Implementation, And/Or Operation By Anyone Other Than Persons With Appropriate Technical And Mechanical Training Can Result In Damage To Equipment Or Property, Serious Personal Injury, Or Death. Proper Precautions And Safety Procedures Should Be Implemented Prior To The Installation And Operation Of Equipment.