Hydraulic Oil Spin on 10-micron Return Filter Assembly 3/4" BSP Ports 120 LPM

Hydraulic Oil Spin on 10-micron Return Filter Assembly 3/4" BSP Ports 120 LPM
The Long term reliability of hydraulic equipment is greatly enhanced if the Hydraulic Oil is continuously filtered.
This Filter assembly is a Quality item and is manufactured using the latest Filtration materials and technology by FaiFiltri Italy.
These Filters are usually installed in the low-pressure tank return line and generally just before the oil returns to the tank.

What you'll get
1 x Spin On metal Canister with 10 microns (paper filter media) 98 mm diameter x 200 mm long
1 x Aluminium Alloy Filter Head complete with "Clogged filter"
internal bypass set at 1.7 Bar (25 PSI) and Buna "N" O ring seal,
The filter head has two 1/8" BSPT ports available to mount an optional "clogging indicator"
(Clogging Indicators are Available at an additional $30 each)
Filter Head Inlet and Outlet ports are 3/4" BSPP.

On the top of the Filter Head are two M6 threaded holes 38 mm apart for
mounting the filter assembly to a bracket or machine framework.
Dimensions assembled. 240 mm high 100 mm wide 100 mm deep.

Max Oil Flow Rate 120 liters / Minute ( 30 US GPM)
(Larger flows and sizes available)
Max Operating Pressure 12 Bar (174 PSI)
Max Differential pressure 4 Bar (58 PSI)
Burst Pressure 25 Bar (363 PSI)
Filter head internal Bypass Pressure 1.7 Bar (25 PSI)
Filter media = inorganic, impregnated resin-bonded microfibers supported upstream and downstream.
Operating Temperature -25 to +110 degrees C
Filtered Media = Suitable with All Mineral Oils, Fuels, Glycol/Water solutions, and Most Synthetic oils.
Contact us with any questions you may have or for a different filter port size or micron.

Email: hosefixersaustralia@gmail.com

Phone: 07 5563 1982
Hours: QLD Time 8 am to 4 pm Monday - Friday, excluding public holidays
If you have any questions please don’t hesitate to contact us
Best regards,
Hydraulic.Online
Improper Selection, Installation, Implementation, And / Or Operation By Anyone Other Than Persons With Appropriate Technical And Mechanical Training Can Result In Damage To Equipment Or Property, Serious Personal Injury, Or Death. Proper Precautions And Safety Procedures Should Be Implemented Prior To The Installation And Operation Of Equipment.

MM 28/8/2023 PIC + Alt Text, ABC, SEO Feed.

DLM $ 28/09/23