Phone: (07) 5563 1982 | 1300 146 737

Select Page

Hydraulic Power Pack 12-24V DC 5 Lt/min 2800 PSI P&T / Single Acting / Double Acting

5 lpm
In stock
Product Details

Powered by 12 or 24 Volt DC this proven quality Hydraulic Power Pack or HPU comprises a Motor, Pump, Tank & optional Solenoid valves. It is designed to supply an oil flow of 5 Lt/Min at a Pressure of 2500 PSI.
This is available in
P & T Pressure & Tank port model. Connect a pressure line to the hydraulic unit's outlet, which in turn will connect to your own manual flow control valve.
S/A single-acting. Comes with an optional pendant controller, Powerpack only drives load up. gravity brings load down
D/A double-acting. comes with optional pendant control, and drives load both up & down. (as per photo)
Optional Dust Cover. Steel Foot Mount see photos

Tank sizing

For P & T & D/A (double acting), 10 liter tank is maximum size. D/A rams send oil back from other side of the piston when extending / retracting, meaning oil a large oil capacity is not required

For Single Acting, larger tanks are available.

Watch the video below to see first hand some of the great features that come as standard on these quality units.

The video below Shows you how to correctly wire up a 12 or 24 Volt DC Power Unit

Intermittent use only

Please note. As standard, these are designed to be mounted Horizontally. If mounting Vertically(tank down) you must let us know. We need to change the oil pickup inside the tank. As standard, it is too high for vertical mounting. The pump will not 'pick up' oil
e.g. Mini Cranes, Tail Gate Loaders, Ramps on trailers and low loaders Camper van or camper trailer leveling, or any other hydraulic circuit requiring intermittent use, low flow, and high-pressure hydraulic oil.
This Unit is capable of generating up to 200 Bar (3000 PSI) Pressure at a reduced flow rate. Pressure relief is set at 2500 psi as standard
Power Rating 12 Volt DC, 1.6 KW, or 24 Volts DC, 2.2 KW
Flow 5.0 liters per Minute at 170 Bar (2500 PSI)
Max Pressure up to 200 BAR (3000 PSI at reduced flow)
Pressure relief valve Factory set at 170 BAR (2500 PSI)
Discharge Ports 9/16 UNO
3.8 Liter capacity Oil tank with combination filler breather level plug and separate plug.
Use ISO 48 Hydraulic Oil or ATF Fluid for this unit
Can be mounted Horizontally as well as Vertically (Motor Up only)# You MUST contact us so we can change oil pick up!!!!
Safety thermistors are installed in motor windings to prevent overheating.
Duty Cycle = 25% at Low Duty, low load and pressure (600 PSI) = 100Amps Draw,
Allowable run time 12.5 minutes and then allowed to totally cool down.
or 150 seconds ON - 400 seconds OFF.
Duty Cycle = 19% at Medium duty medium load and pressure (1600 PSI) = 160 Amps Draw
Allowable run time of 7.5 minutes and then allowed to totally cool down.
or 150 seconds ON - 640 seconds OFF.
Duty Cycle = 7% 300 Amps High Duty High Load and pressure (3000 PSI) = 300 Amps Draw
Allowable run time 1.7 Minutes and then allowed to totally cool down
or 150 seconds ON and 2000 seconds OFF.
Dimensions Length = 36cm x Width = 23cm x Height = 21cm
Weight 16 KG

We also offer ‘Depot to Depot’ freight as a cheaper alternative for larger items.
Please call or email for this freight option
Please call us at 0755631982 or


Save this product for later

All your hydraulic needs in one place! Search products or browse categories below

Products on Hydraulic.Online are described and explained in non technical terms, with photos, charts and or videos. Most of our clients also tend to upgrade to more complete systems this is because they can pick up a phone and call us for a consultation. Call us and experience it for yourself! Australia +61 (07) 5563 1982.

(Hours 8am – 4pm Monday – Friday AEST, excludes National & QLD public holidays)