Call now: (07) 5563 1982

Hydraulic Power Pack 240v 6.0 L/Min 2.2kw (3000 Psi) Double Acting Complete With Control Box

2.2 240 + CONTROL BOX
AU$2 478.99
In stock
1
Product Details

Double Acting With Electric Control Box 240 Volt Powerpack 6lpm
This is a single-phase 240 Volt AC hydraulic Power Unit with a 2.2 kW motor and a 2.1cc/rev pump with a flow rate of 6 liters per minute at a pressure of 2500 PSI. This particular unit is a ready-to-go, (apart from a lead-on motor) to be used with the up / down push button to run through a 240-volt control box. It is specially made with a timer, to enable motor RPM to build before engaging the up / down solenoids. This ensures the circuit breakers won't cut in. This setup has been 'field-tested. We do sell the 240-volt power pack on its own in another listing, however, using 240-volt solenoids with a pendant controller needs to be done this way.
This Double acting 240 Volt DC Power Pack has been designed specifically as a compact pressure supply unit to supply oil flow at pressure to a remote-mounted hydraulic circuit. These are designed only for intermittent use, not constantly running.
This unit comes with a 10 lt tank standard
Capable of generating up to 200 Bar (3000 PSI) Pressure.
D/A double acting which drives the load both up & down.
Please note; electric cables are not supplied with these units as per Australian law. There is a wiring diagram under the power terminal lid. An Electrician is required by law to hook up power cords.
ROTATION; When installing cable, the fan must run counterclockwise when looking from behind at the motor fan
Mocen AC power units are CCW looking at the motor fan.


Heat is a by-product of hydraulic energy. It is the biggest enemy of hydraulic circuits, in that it can significantly degrade oil structure, 'cook' hoses & seals & lead to early pump failure.
For these reasons, it is important to choose the correct oil tank size to aid in oil cooling. Tank dimensions are below. (please use dimensions as per below to work out length & height


This is a quality motor and pump Manufactured to very high standards.
Buy with Confidence from a long established Hydraulic Service Center and get a
12-month warranty and an Australian Tax Invoice.
Specifications
Power Rating 2.2 KW, 240 Volts
Flow 6.0 liters per Minute at 170 Bar (2500 PSI)
Max Pressure up to 200 BAR (3000 PSI)
Pressure relief valve Factory set at 150 BAR (2200 PSI)
Ports 9/16 UNO
10 Liter capacity Oil tank with combination breather/level plug and separate fill plug.
Flexible Mounting Positions can be mounted Horizontally or Vertically (Motor Up)
Power draw 9.7 amp draw`
Duty Cycle = intermittent
Dimensions Length = 70cm Width = 22 cm Height = 25 cm
Weight 21 KG
We also offer ‘Depot to Depot’ freight as a cheaper alternative for larger items. Please call or email for this freight option Please call us on 0755631982

Save this product for later

All your hydraulic needs in one place! Search products or browse categories below

Products on Hydraulic.Online are described and explained in non technical terms, with photos, charts and or videos. Most of our clients also tend to upgrade to more complete systems this is because they can pick up a phone and call us for a consultation. Call us and experience it for yourself! Australia +61 (07) 5563 1982.

(Hours 8am – 4pm Monday – Friday AEST, excludes National & QLD public holidays)

https://www.youtube.com/watch?v=jpHhaZJd4IE