Hydraulic Pressure Test Hose DN2 PN630 Hydraulic Oil Water Gas

Looking to Quickly Safely and without Tools or Leaks Connect and Measure the Pressures on your or
Your Customer's equipment?

Well if you fit Test Ports to your machinery's hydraulic system (or if it already has test ports fitted like most Caterpillar equipment) you can quickly connect this Small Tough and Flexible Test hose to either a remote mounted Pressure Gauge or to your handheld pressure Test Kit and SEE Exactly how well the machinery is performing and or confirm why it is NOT Performing.
DN2 = Small 2 mm inside diameter hose.
PN 630 = Tough Flexible Hose with a Rated Working pressure of 630 bar (9,300 psi)
Available in various lengths from 0.5 to 6.0 Meters Long.
Lots of Hose ends available from Metric, BSP, and UNF
Standard connectors are Test 20 at each hose end
Many other Test 20 Type adaptors are also available.
Suitable for hydraulic oils, water and air, and some gases.
hydraulic Pressure Test Hose rated to 630 bar or 9300 psi Small Flexible and Tough Hose with 2 mm inside diameter. Many hose-end options and lengths are available. Comes standard test 20 x test 20 hose ends optional 1/4 inch, 1/2 inch pressure gauge adaptors also Caterpillar couplings. Suitable for hydraulic oil, water, air, and some gases. 630 bar Test
Hose Length 0.5 m 1.0 m 1.5 m 2.0 m 2.5 m 3.0 m 4.0 m 5.0 m 6.0 m
Email: hosefixersaustralia@gmail.com
Phone: 07 5563 1982
Hours: 8 am to 4 pm Monday - Friday, excluding public holidays
If you have any questions please don’t hesitate to contact us
Best regards,
Hydraulic.Online
Improper Selection, Installation, Implementation, And/Or Operation By Anyone Other Than Persons With Appropriate Technical And Mechanical Training Can Result In Damage To Equipment Or Property, Serious Personal Injury, Or Death. Proper Precautions And Safety Procedures Should Be Implemented Prior To The Installation And Operation Of Equipment.