Hydraulic Priority Flow Control Valve 300 Lt/Min

Adjustable Flow Valve 1 1/4" Bspp 300 LPM

Used to Split One flow into Two Flows. It is adjusted by moving a handle through a 90 degree arc.

FC51 1 1/4" 300 LPM

The FC51 pressure compensated adjustable flow control valves are easily adjustable by rotating the handle. The flow out of the ‘CF’ or controlled flow port can be varied within the range. Any remaining flow is bypassed to the ‘EF’ or excess flow port. This flow can be used to power another circuit or can be returned to tank.

Max Flow P port 300 LPM

CF Flow 0-180 LPM

Priority Max Pressure 200 Bar / 3000 PSI

Ports 1 1/4" BSPP

• 3000 PSI Max

• 180°F Max Temp

• Filtration 17/14/19

• For use with mineral based Hydraulic Fluid

• Side port configuration

• 100% Tested before dispatch

• External seals on rotary spool prevent contamination from locking up spool

Flow control valves, help with pressure compensation. This valve is a pressure compensated adjustable flow control valve. By rotating the handle, the flow out the “CF,” or controlled flow port, can be varied from approximately 0 to the maximum controlled flow allowed. Any remaining flow is bypassed to the “EF” or excess flow port. This flow can be used to power another circuit or can be returned to tank. Once the controlled flow is set it will remain nearly constant with variations in pressure on either the controlled or excess flow ports.

Ports 1 1/4" BSPP

PIC $ RL 12.1.22

IMPROPER SELECTION, INSTALLATION, IMPLEMENTATION AND/OR OPERATION BY ANYONE OTHER THAN PERSONS WITH APPROPRIATE TECHNICAL AND MECHANICAL TRAINING CAN RESULT IN DAMAGE TO EQUIPMENT OR PROPERTY, SERIOUS PERSONAL INJURY OR DEATH. PROPER PRECAUTIONS AND SAFETY PROCEDURES SHOULD BE IMPLEMENTED PRIOR TO INSTALLATION AND OPERATION OF EQUIPMENT.