PHASING CYLINDERS AUSTRALIAN MADE 8” stroke

Australian made Hydraulic phasing Cylinders

8" Stroke

Phasing tie rod cylinders are ideal for construction and agricultural applications where you need to lift independent loads plumbed in series.

One irritating fact of life with normal AG style hydraulic cylinders is that they will never move at the same rate as each other when plumbed up in a series. This is due to slight tolerance differences, seal age differences etc. The oil pressure will always go wherever there is the least resistance, so if one cylinder's seals are a little worn, or pushing weight is less, that ram will extend at a faster rate.

Phasing cylinders are one solution that will ensure all cylinders extend & retract at the same rate. This is made possible because the oil volume sizes are precisely worked out for each ram by changing rod diameter, & cylinder bore.

To choose your phasing rams correctly,

First establish your Stroke required, ie 12”. You must then choose all other matching rams in this same ‘Stroke’ range. See our other phasing ram listings.

Then decide how many rams are required.

Then choose your ‘Master’ ram size, (the larger the ‘bore’ size, the more tonnage available)

Then, pick your next ‘slave’ ram as the next bore size down from the Master. Continue going down one bore size at a time for multiple phasing rams.

Bleeding the system; They have a internal poppet on the piston that allows oil to flush through the cylinders when fully extended this will bleed cylinders automatically.

These phasing cylinders are engineered with matching internal volumes. During operation, the fluid displaced from the rod end of the preceding larger cylinder supplies the fluid to the piston end of the following smaller cylinder. Matching the corresponding internal rod end and piston end volumes ensures the cylinders in series extend and contract simultaneously.

Australian made Tuff phasing cylinders are engineered with matching internal volumes. During operation, the fluid displaced from the rod end of the preceding larger cylinder supplies the fluid to the piston end of the following smaller cylinder. Matching the corresponding internal rod end and piston end volumes ensures the cylinders in series extend and contract simultaneously.

Please see our other listings for 12",16", 18" 24" stroke phasing cylinders.

8 Inch Phasing Cylinders Female Clevis Each end with 1" Pins

Freight. We can send from either Brisbane or Melbourne. Please note that the quoted freight price may be subject to a surcharge for remote locations. We will call to discuss this with you if it applies to your address. We are happy to quote freight for multiple items, please call or email us.

$RR24032021