Phone: (07) 5563 1982 | 1300 146 737

Select Page

Pair 1/2" BODY Flat Face Hydraulic Couplers UNO Threads FREE Caps

QC-FF-UNF-FM-0800
AU$88.00
In stock
1
ProductDetails.QuantityLimit.minmax
Product Details
Brand: ENGMATTEC

1/2" BODY Flat Face Hydraulic Quick Connect Couplers with 3/4", 7/8" & 1-1/16" UNO threads one set or Pair.
FREE: Pair of Synthetic Rubber Dust caps with each set purchased.

Zero Drips Dry Break, and Locking on Sleeve:

Flat face couplers are now used extensively on all types of Hydraulic machinery because

  • they are easy to connect
  • they are virtually dry on disconnection and
  • they have a locking sleeve that prevents unwanted disconnects when knocked.
  • The 1/2 inch size of Flat Face Quick Connect Hydraulic Couplers is the most common type of flat face coupler available.


Three (3) different UNO Threads:
These Flat Face Hydraulic Quick connect couplers are available with three (3) different sizes of the American UNO Thread with the same 1/2" sized body.
The female UNO thread sizes available with these 1/2 Flat Face couplers are as follows:

  • 3/4" UNO or dash #12 thread
  • 7/8" UNO or dash #14 thread
  • 1-1/16" UNO or dash #17 thread



Need Help?

Call us on (07) 5563 1982

ENGMATTEC (ENG-MAT-TEC) Flat Face quick connect hydraulic couplings are our Brand, they are manufactured for us and are suitable for applications involving dusty or dirty environments and where oil loss on disconnection cannot be tolerated.

This series of couplings are designed for use in excavator hammer (rock breaker) hydraulic and Auger circuits and other applications involving high pressure pulses. Construction plant, mobile equipment, general industrial, mining and agricultural.

Compatibility and Interchangeability with other makes:

These 1/2" Flat-Face dry break Hydraulic quick couplers are compatible and Interchangeable with other Industrial hydraulic Brands ;

Industry Interchangeability - mates with other manufacturers' ISO 16028 couplings such as Faster 2FFI, Cejn x62, Hansen Qa2900, and Parker FE/FF/FEM series, DNP PLT4, Stucchi FIRG/A Series, Ryco R110-06/08, Safeway FF49, Aeroquip FD89/FD49

The above price is for one pair, (one set which includes one male and one female coupler) single male/female halves are available, please call or email.
Please refer to our size charts below for correct sizing. The best measurement to use is 'J' column.

Specifications
Threaded Connections
3/4" or 7/8" or 1-1/16 UNO

Rated Working Pressure

350 Bar (5100 PSI)

Flow Rates

From 20 to 70

Pressure drops

less than 0.1 Bar @ 20 Litres / Minute

6 Bar @ 150 Litres / Minute

Operating Temperatures

-20 to 100 degrees Celsius

Materials of Construction

Carbon steel body,
Heat treated wear parts to increase hardness and corrosion resistance,
Nitrile seals.
All couplings are Zinc plated.

Weight

750 grams

Features

Flat mating faces are easily wiped clean to prevent the ingress of contaminants.

Improved flow path minimises the pressure drop.

Non-spill design avoids fluid loss during connection and disconnection.

No air intrusion during connection.

Locking sleeve prevents accidental disconnection.

Zinc nickel surface treatment and meets 200 hour salt spray tests.

Standard

This Series conform to ISO 16028 (2006) in all respects

Connection / Disconnection Under Pressure

Connection with residual pressure in the line will be difficult or impossible.
For applications where connection under pressure is required,
Connect under Pressure male couplings are available,

Click here for Connect Under Pressure Flat Face Couplers

or screw couplings from our VV or VD Series are recommended.

Click Here for VD series Screw Together Hydraulic Quick Connect Couplers

Click Here for VV series Screw Together Hydraulic Quick Connect Couplers

Please note" Disconnection of any quick disconnect / quick release coupling whilst under full system pressure can be very dangerous and should not be attempted.

Buy with Confidence from a long-established Hydraulic Service Center get a 12-month warranty and an Australian Tax Invoice.

If you have any questions please don’t hesitate to contact us for further assistance.

Email: click here to send us an e-mail or write to sales@mhfgc.com.au

Phone: 1300 1 Hoses (1300 146 737) 0r 07 5563 1982
Hours: 8am to 4pm Monday - Friday, QLD time excluding public holidays
Out of Stock

It is our desire to always have every listed item actively in stock. Occasionally (but very seldom) due to high demand,
short supply or human error we may be momentarily out of stock on an item.
If this happens you will be notified and given the option to either cancel for a full refund or wait for the part to come in (typically 3-14 days).

Best regards,
Hydraulic.Online



IMPROPER SELECTION, INSTALLATION, IMPLEMENTATION AND/OR OPERATION BY ANYONE OTHER THAN PERSONS WITH APPROPRIATE TECHNICAL AND MECHANICAL TRAINING CAN RESULT IN DAMAGE TO EQUIPMENT OR PROPERTY, SERIOUS PERSONAL INJURY OR DEATH. PROPER PRECAUTIONS AND SAFETY PROCEDURES SHOULD BE IMPLEMENTED PRIOR TO INSTALLATION AND OPERATION OF EQUIPMENT.

PIC $RL 11.5.22
MM 19/01/2024 $ abc, pic, alt text, seo

Save this product for later

All your hydraulic needs in one place! Search products or browse categories below

Products on Hydraulic.Online are described and explained in non technical terms, with photos, charts and or videos. Most of our clients also tend to upgrade to more complete systems this is because they can pick up a phone and call us for a consultation. Call us and experience it for yourself! Australia +61 (07) 5563 1982.

(Hours 8am – 4pm Monday – Friday AEST, excludes National & QLD public holidays)

https://www.youtube.com/watch?v=jpHhaZJd4IE