Phone: (07) 5563 1982 | 1300 146 737

Select Page

Pair Flat Face Hydraulic Couplers 1/2" Dry Break 5100 PSI BSP UNO ORFS Threads

QC-FF-000-P-081012
AU$88.00
In stock
1
ProductDetails.QuantityLimit.minmax
Product Details
Brand: ENGMATTEC

ENGMATTEC Flat Face Hydraulic Quick Connect Couplers are made to ISO 16028
Available in the following body sizes 1/2", 5/8", and 3/4" inch.
Ports connection threads in BSPP, UNO or ORFS are also available.

ENGMATTEC is a Quality Dry Break quick connect hydraulic coupling rated to a working pressure of 5,000 psi (350 bar) and the ability to flow oil from 115 to 200 Lt/min.

ENGMATTEC Flat Face hydraulic Couplers are suitable for applications with high impulses, dusty, dirty or environmentally sensitive environments where oil loss on disconnection cannot be tolerated.

The prices stated are for one pair, (one set which includes one male and one female coupler)

ENGMATTEC branded Couplers will come with a FREE set of Dust Caps valued at $10.00.

These are designed to the ISO 16028 standard (the most common Standard), and are interchangeable with the following brands of Flat Face couplers:

DNP - PLT4, Stucchi FIRG/A Series, Faster 2FFI (up to 1/2" body) & FFN38,
Hanse QA, Ryco R110 08 , Safeway FF49, Aeroquip FD89/FD 49


Flat face couplers come in a variety of BODY sizes as well as various threads. It is important to measure the tip of the Male flat face & compare it to the column highlighted in our photo to ensure correct fitment.

This series of couplings are designed for use in excavator hammer and Auger circuits and other applications involving high pressure pulses. Construction plant, mobile equipment, general industrial, nuclear, mining and agricultural.

Used extensively on Yanmar, Bobcat, Digga, Ditch Witch, and Case equipment, ( some Bobcat couplers will require SAE/UNO threads Instead of BSP female threads)

Dimensions and Performance:

Thread size Chart ID & OD of threads

Please note column J is MOST IMPORTANT !

We can supply all of these, call us

Body sizes and Thread Types Available:

  • 1/2" Body x 1/2" BSPP thread
  • 1/2" Body x 3/4" BSPP thread
  • 1/2" Body with 3/4 (#12) UNO thread
  • 1/2" Body x 7/8" (#14) UNO thread
  • 1/2" Body x 1-1/16" (#17) UNO thread
  • 1/2" Body x 1" ORFS male bulkhead thread
  • 5/8" Body x 3/4" BSPP thread
  • 3/4" Body x 3/4" BSPP thread

Rated Working Pressure:

350 Bar (5,100 PSI)

Flow Rates:

From 20 to 200 Litres/Minute

Pressure drops:

less than 0.1 Bar @ 20 Litres / Minute

6 Bar @ 150 Litres / Minute

Operating Temperatures

-20 to 100 degrees Celsius

Materials of Construction

Carbon steel body, treated to increase hardness and corrosion resistance, Nitrile seals. H Series couplings are Zinc plated.

Weight

750 gms

Features:

Flat mating faces are easily wiped clean to prevent the ingress of contaminants.

Improved flow path minimises the pressure drop.

Non-spill design avoids fluid loss during connection and disconnection.

No air intrusion during connection.

Locking sleeve prevents accidental disconnection.

Zinc nickel surface treatment and meets 200 hour salt spray tests.

Standards:

This Series conform to ISO 16028 (2006) in all respects

Connection / Disconnection Under Pressure:

Connection with residual pressure in the line will be difficult or impossible.
For applications where connection under pressure is required,
Stucchi HCP male Flate face couplings,
or Poppet Style Screw Together Couplings from either the VD or VV ranges are
recommended.

Click here for Stucchi HCP Connect Under Pressure Flat Face Couplers

Click here for VD series Screw Together Poppet Style Couplers

Click here for VV Series Screw together Poppet Style Couplers

Disconnection of any quick disconnect / quick release coupling whilst under full system pressure
can be very dangerous and should not be attempted.

Buy with confidence from a long established Hydraulic Service Center and get a 12 month warranty and an Australian Tax Invoice

IMPROPER SELECTION, INSTALLATION, IMPLEMENTATION AND/OR OPERATION BY ANYONE OTHER THAN PERSONS WITH APPROPRIATE TECHNICAL AND MECHANICAL TRAINING CAN RESULT IN DAMAGE TO EQUIPMENT OR PROPERTY, SERIOUS PERSONAL INJURY OR DEATH. PROPER PRECAUTIONS AND SAFETY PROCEDURES SHOULD BE IMPLEMENTED PRIOR TO INSTALLATION AND OPERATION OF EQUIPMENT.

MM 21/01/2024 $ abc pic alt tags feed related items SEO.


Save this product for later

All your hydraulic needs in one place! Search products or browse categories below

Products on Hydraulic.Online are described and explained in non technical terms, with photos, charts and or videos. Most of our clients also tend to upgrade to more complete systems this is because they can pick up a phone and call us for a consultation. Call us and experience it for yourself! Australia +61 (07) 5563 1982.

(Hours 8am – 4pm Monday – Friday AEST, excludes National & QLD public holidays)

https://www.youtube.com/watch?v=jpHhaZJd4IE