AU$3 191.99
In stock
Product Details
Brand: Hosemart
UPC: Does not apply

Ready to fit Remote Control compatible Monoblock Hydraulic Oil Flow Control Valve

3 lever x 3 spool or 5 lever x 5 spool options.

This is a brand new high quality made in Taiwan 80 litre per minute valve complete with 8 button remote control unit. It is designed for Tilt Tray Trucks, Cranes. Skip Bin Trucks, Front end Loaders, Backhoes or any application where you need to control 3 individual cylinders or hydraulic motors (ie winches).

This unit can replace most medium to large tilt truck existing spool valves. Simply bolt on, either re attach your existing hoses, or worst case buy adaptors (we can supply ) to make your hose threads compatible.

The remote unit requires air supply to the valves air/solenoids, power, 12 or 24 volt, & basic wiring to the valve solenoids. This package comes with an Air water Separator / Oiler, to ensure long term trouble free working.

Our valve solenoids come complete with push fit air fittings. We supply a few metres of air hose plus push fits to hook up. You will need to join to air on your truck. (most air tanks have spare blanking plugs to run from).

The 8 button remote Transmitter is supplied programmed and linked to a Receiver unit that will send signals directly to the control valve. The Monoblock Hydraulic flow control valve is also supplied with Levers for convenient manual use.
This valve comes standard with 3 cylinder spools, which means when the lever or button are released the tray, winch etc will lock the cylinder or winch in place .

Also available is a 5 lever x 5 spool valve with 3 remote control functons.

Use remote functions for Winch, Tray Tilt & and Tray Slide, use two manual levers for Car Cradle or Tee Bar.

Parts in photo are of actual unit, & parts to be supplied. Remote control handpieces (transmitters) are available off the shelf if lost.

These valves are regularly used in hydraulic circuits to divert the flow of high pressure Hydraulic oil and are typically used to control the speed and movement of hydraulic cylinders or motors.

The remote is a semi water-resistant unit, however, care needs to be taken mounting it. We recommend mounting in your cab, then running some 7 core trailer wire back to the valve. It comes with an installation guide.

  • Construction = Monoblock
  • Material of Construction = Steel
  • No of Spools = 3 , or 5 option
  • Material of Construction = Case Hardened Steel
  • O-rings made of NBR (Buna-N®)
  • Max Flow Rate = 80 liters/min (20 Gallons per Minute)
  • Max Working Pressure = 315 Bar (4725 PSI)
  • Spool Type = Cylinder
  • Spool Movement = Lever action, Spring Return to Center.
  • Built in Relief Valve = Adjustable (factory set at 175 bar 2500 PSI)
Ports Sizes
  • Pressure Port 31" BSPP
  • Cylinder Ports 3/4" BSPP
  • Tank Port 1" BSPP
  • Power beyond port 1" BSPP
  • Operating temperature range: -20 °C to + 80°C
  • Dimensions = L x W x H = 250 x 200 x 60 mm
  • Weight 18KG

Please call 0755631982 or send us a question via Email for different spool configurations, spool numbers and costings.

Many types of adapters threads, hydraulic hose and field fit hose fittings available please see our other listings

This a High Quality Valve and has many outstanding features, including.
  • built-in adjustable relief valve
  • high performance,
  • high efficiency,
  • small volume,
  • mass flow,
  • leak resistance.
  • Compact construction.
  • Low pressure drop.
  • Long service life.
  • High efficiency.
  • Choice of various ports and circuit valves.
  • High accuracy spool is hardened for long term accuracy.
  • Sub-plate mounting.
  • Handle shift operation.

*Some remote areas may incur an extra surcharge
Please note*

Installation ; As per the listed photos, there are a choice of two pressure ports "P" (only use one), two "T" Tank return ports and also there is a "C" port. This "C" port is for the: Power Beyond function. This allows another valve to run pressure from this C port downstream if necessary. (must be a lower volume though). A & B ports run to your cylinder or other functions.


Additional information about us...

Tax invoices are supplied with every purchase

Emails will be answered within normal business hours (ie: 8.30am - 5.00pm M-F)

With any questions, please, don’t hesitate to contact us for further assistance.

Best regards,

Save this product for later

All your hydraulic needs in one place! Search products or browse categories below

Products on Hydraulic.Online are described and explained in non technical terms, with photos, charts and or videos. Most of our clients also tend to upgrade to more complete systems this is because they can pick up a phone and call us for a consultation. Call us and experience it for yourself! Australia +61 (07) 5563 1982.

(Hours 8am – 4pm Monday – Friday AEST, excludes National & QLD public holidays)