Phone: (07) 5563 1982 | 1300 146 737

Select Page

Re-manufactured Power Steering Hoses with GATES 6PS-188 1,500 psi

6PS-188 Pwr Str
AU$150.00
In stock
1
Product Details
Brand: GATES

Starting from $150 we will take your leaking power steering hose and re-manufacture it with
high pressure and high-temperature GATES 6PS-188, 300 Degrees F High-Performance Power Steering Hose.

Gates 6PS-188 power steering Hose is pressure rated to work all day, every day at 1,500 psi or (100 bar).
Interesting facts, Gates 6PS-188 power steering hose has a minimum burst pressure of 6,000 psi or (400 bar) and
Is suitable for use in temperatures as Low as minus -40 degrees all the way to a continuous 150 degrees Celsius.

If you have recently been told by the Spare Parts department at the stealer (sorry we meant the Dealer) that...

  • A new replacement power steering hose can cost you hundreds of dollars,
  • and or it will take several weeks to be shipped or delivered from America, China, Europe, Japan, Korea or the UK.
  • or that parts are just not available for this (your) model any more.

Then your options are limited and you should seriously consider that you and or
your mechanic remove the hose from the vehicle and bring it or pack it and mail it to us.

For over Two decades we have re-manufactured Power Steering Hoses for
Many Enthusiast and Classic Vehicles as well as heaps of Prime Movers and Trucks, including,
but not limited to....

Alfa Romeo, Audi, Bently, Ford, Freightliner, Fuso, Hino, Honda, Hyundai,
International, Isuzu, Iveco, Kenworth, Kia, Land Rover, Mack, Mazda, Mercedes Benz,
Nissan, Rolls Royce, Scania, Ssangyong, Toyota, Volvo and Western Star.

Please Note We do not have a hoist to remove or install a power steering hose to a car,
but we work on Trucks and Prime Movers all the time be it at your Place or at our Nerang Service Centre.

If you don't see your car or truck on this list? then read and follow the instructions below very, very carefully.

1. Chill out and relax by breathing in and out,
OKAY, now keep reading the instructions below ... then
read them again and do exactly as described below.

2. Get your mobile phone and take the best pictures you can of your power steering hose and then email them to this email address below, don't forget to send us your phone number as well as a brief message with the make and model of your car or truck (because that always helps us) and don't forget to attach the awesome pictures you took of your power steering hose or hoses.

sales@mhfgc.com.au,

3. Wait for a reply, usually withing the 1 hour, 6 minutes, and 23 seconds AND then IF it is between 8:00 AM and 3:30 PM Monday to Friday, Queensland time! call us on

1300 1 HOSES or on (07) 5563 1982.

4. OR Just take the hose or hoses of, Get On Your Bike and Bring them to us at

MHF & Hydraulics, 30 Palings Court, Nerang, QLD, 4211.
our service centre is just off exit 69, M1, Northbound.

Gates Power Steering Hose is suitable for many oil types including

  • Dexron® II, Dexron® III
  • Ford M2C 138 CJ, M2C 166H,M2C-33 F, M2C-33 G, Mercon
  • GM Type A, Suffix A
  • ISO 32, ISO 46
  • SAE 10W, SAE 10W-20

MM 26/01/2024 abc, feed, seo.

Save this product for later

All your hydraulic needs in one place! Search products or browse categories below

Products on Hydraulic.Online are described and explained in non technical terms, with photos, charts and or videos. Most of our clients also tend to upgrade to more complete systems this is because they can pick up a phone and call us for a consultation. Call us and experience it for yourself! Australia +61 (07) 5563 1982.

(Hours 8am – 4pm Monday – Friday AEST, excludes National & QLD public holidays)

https://www.youtube.com/watch?v=jpHhaZJd4IE