Remote Control Ready 5 Spool Electro-Hydraulic Valve 80 Lpm
Want to Know if a Remote Controlled Hydraulic Valve in your Factory or Mobile Equipment will be any Good for Your Business?
Read On to Find out.
Efficiency
Remote Controlled Hydraulic valves improve efficiency, and "Efficiency is defined as the ability to accomplish something with the least amount of wasted time, money, and effort or to put it another way "Competency in performance".
Definition courtesy of https://www.facilitiesnet.com/
Most of our Clients chose to go the remote control route because:
- They realised they were wasting time and being inefficient and or
- They were using expensive labour to press buttons and to pull and push levers and or
- They wanted a safer and quicker way to complete a repetitive or somewhat dangerous task or
- They wanted to either save money or make more money by doing all the above.
SO GET YOURSELF A 5 SPOOL MONOBLOCK VALVE COMPLETE WITH 10 ELECTRO-HYDRAULIC ACTUATORS
BECAUSE THERE ARE ONLY TWO LEFT !!
This 5 spool Monoblock valve comes with all of the spools fitted with Electro-Hydraulic Solenoid valves.
Suitable for Industrial process control applications, as well as for mobile equipment such as tow trucks and Tilt Trays Super Tilt N Slide Trailers, Cherry pickers and Cranes Trucks etc.
Safe Low Voltage 12 and 24 V DC Control No compressed Air Required!!
Various control options available switches and push buttons with relays, pendant controllers with push buttons and Radio Remote Control for transmission of signals up to 300 Metres
Optional Radio Remote Controls System with 10 Buttons From $995.
Call us on 07 5563 1982 for a Free no-obligation consultation.
Made in Europe this monoblock valve is specifically designed for remote control applications.
The valve also comes standard with 5 manual override hand actuation levers. . # Please note, for all our monoblock valves, levers can be at either vertical or horizontal fitting. ALSO, the lever boxes, are able to be rotated 180° so that you can further orientate the levers.
Not to mention and light flexible air tubing that is susceptible to deterioration and damage.
- Greatly simplifies and tidy's up the hydraulic system's architecture,
- Speeds up installation and set up and
- Improves reliability and consequently safety.
Principals of operation.
- divert a small amount of system Oil flow from the actual hydraulic circuit to
- move the flow control spool and
- change the direction of the flow of hydraulic oil
- Automotive Tilt Trays,
- Mobile Plant
- Wood Chippers
- Stump Grinders and
- Agricultural equipment.
Installation; As per photos, there is One side entry pressure port "P1" , and one side exit Tank return port "T1 ",
Top entry Pressure and Tank ports are available for use.... with modifications to the Eletro Hydraulic Supply and Return piping.
There is also a "N" (VRE) port. This "N" (VRE) port is for the: "Power Beyond" function.
This allows another valve to run pressure from this "N" (VRE) port downstream if necessary.
(Power beyond requirements must be less than or equal to 80 litres/min flow)
A & B ports will connect to your cylinders, motors or other functions.
All your hydraulic needs in one place! Search products or browse categories below
Products on Hydraulic.Online are described and explained in non technical terms, with photos, charts and or videos. Most of our clients also tend to upgrade to more complete systems this is because they can pick up a phone and call us for a consultation. Call us and experience it for yourself! Australia +61 (07) 5563 1982.
(Hours 8am – 4pm Monday – Friday AEST, excludes National & QLD public holidays)