(07) 5563 1982

Remote Ctrl Package 5 Spool Electro-Hydraulic Ctrl Valve 80 Lpm
+3

Remote Ctrl Package 5 Spool Electro-Hydraulic Ctrl Valve 80 Lpm

SKU HID 3/5 REMOTE PACK
AU$2 194.00
Out of stock
1
Product Details

TILT TRAY 5 SPOOL VALVE COMPLETE WITH REMOTE CONTROL PACKAGE

This 5 spool Monoblock valve comes with all three (3) of the spools fitted with Electro-Hydraulic Solenoid cartridge valves, & two for your car cradle are manual. Complete with remote control. IDEAL FOR TILT TRAY TRUCKS WITH CAR CRADLE.

To fit, Simply bolt on, either re-attach your existing hoses, or worst case buy adaptors (we can supply cheaply) to make your hose threads compatible. Some wires do need to be attached, instructions provided.

Made in Europe this monoblock valve is specifically designed for remote control applications.

The valve also comes standard with 5 manual override hand actuation levers. . # Please note, for all our monoblock valves, levers can be at either vertical or horizontal fitting. ALSO, the lever boxes, are able to be rotated 180° so that you can further orientate the levers.

Electro-Hydraulic Control valves eliminate the need for a separate compressed air actuation system.
You Do Not Require the following, Clean dry air, an Air pump, Air tank, Air driers, Pressure regulators, and lubricators to remove moisture, rust, dust, and lubricate the air.

Not to mention and light flexible air tubing that is susceptible to deterioration and damage.

This in turn has the following advantages
  • Greatly simplifies and tidy's up the hydraulic system's architecture,
  • Speeds up installation and set up and
  • Improves reliability and consequently safety.

Principals of operation.

Electro-hydraulic Valves use Solenoid actuated Cartridge Valves to
  1. divert a small amount of system Oil flow from the actual hydraulic circuit to
  2. move the flow control spool and
  3. change the direction of the flow of hydraulic oil.

These valves are generally used in Remote Control Applications, such as those found in
  • Automotive Tilt Trays,
  • Mobile Plant
  • Wood Chippers
  • Stump Grinders and
  • Agricultural equipment.
This model has many more useful applications and can be used to operate up to 3 separate functions that require semi automatic actuation of Valves, Cylinders or Rotating motors.
MANUFACTURED IN EUROPE THIS QUALITY 5 SPOOL VALVE IS RATED TO FLOW up to 80 LITERS / MINUTE (20 Gallons / Minute) at pressures up to 250 bar (3600 psi).

IDEAL FOR TILT TRAYS, TRUCKS AND ALL MOBILE PLANT, Cranes, Skip Bin Trucks, Front end Loaders, Backhoes and any hydraulic project REQUIRING 3 FUNCTIONS WITH REMOTE CONTROL CAPABILITY, READY FOR FITTING.
This unit can replace most small to large tilt tray trucks existing spool valves or any other mobile plant equipment that requires remote control capabilities.
Simply bolt on, either re-attach your existing hoses, or worst case buy adaptors (we can supply cheaply) to make your hose threads compatible.
Specifications
  • Construction = Monoblock
  • Material of Construction = Steel
  • No of Spools = 5 Spools all with Manual override lever
  • No of Electro-Hydraulic Actuated Spools = (3) Three.
  • Material of Construction = Case Hardened Steel
  • O-rings made of NBR (Buna-N®)
  • Max Flow Rate = 80 liters/min (20 Gallons per Minute)
  • Max Working Pressure = 250 Bar (3600 PSI)
  • A and B Ports Pressure Rated to 300 bar (4400 psi)
  • Spool Type = Cylinder
  • Coil voltage = 24 Volt DC +/- 10% (12 Volt DC also available)
  • Coil power rating = 24 watts
  • Coil duty cycle = 100%

  • Built-in Relief Valve = Adjustable (factory set at 175 bar 2500 PSI)
    • Ports Sizes
  • Pressure Port 1/2" BSPP
  • Cylinder Ports 1/2" BSPP
  • Tank Port 3/4" BSPP
  • Power beyond port 1/2" BSPP
  • Operating temperature range: -20 °C to + 80°C
  • Dimensions = L x W x H = 200 x 200 x 60 mm
  • Weight 12
    • This a High-Quality Valve and has many outstanding features, including:
  • built-in adjustable relief valve
  • high performance,
  • high efficiency,
  • Compact construction.
  • Low-pressure drop.
  • Long service life.
  • Choice of various ports and circuit valves.
  • High accuracy spool is hardened for long term accuracy.
  • Manual Override Handles for fine control and emergency operation.
    • Please note* These 80 LPM valves require a separate "Power Beyond" sleeve to operate a valve downstream.

    Installation; As per photos, there is One side intry pressure port "P" , and one side entry Tank return port "T ",

    Top entry Pressure and Tank ports are available for use.... with modifications to the Eletro Hydraulic Supply and Return piping.

    There is also a "N" port. This "N" port is for the: "Power Beyond" function.

    This allows another valve to run pressure from this "N" port downstream if necessary.

    (Power beyond must be less than or equal to 80 litres / min flow)

    A & B ports will connect to your cylinders, motors or other functions.

    Buy with Confidence from a long-established Hydraulic Service Center get a 12-month warranty and an Australian Tax Invoice.
    Email: hosefixersaustralia@gmail.com
    Phone: 07 5563 1982
    Hours: 8am to 4pm Monday - Friday, excluding public holidays.
    Tax invoices are supplied with every purchase.
    Out of Stock
    It is our desire to always have every listed item actively in stock. Occasionally (but very seldom) due to high demand,
    short supply or human error we may be momentarily out of stock on an item.
    If this happens you will be notified and given the option to either cancel for a full refund or wait for the part to come in (typically 3-14 days).
    If you have any questions please don’t hesitate to contact us for further assistance,
    Best regards,
    Hydraulic.Online
    ***DISCLAIMER***
    IMPROPER SELECTION, INSTALLATION, IMPLEMENTATION AND/OR OPERATION BY ANYONE OTHER THAN PERSONS WITH APPROPRIATE TECHNICAL AND MECHANICAL TRAINING CAN RESULT IN DAMAGE TO EQUIPMENT OR PROPERTY, SERIOUS PERSONAL INJURY OR DEATH. PROPER PRECAUTIONS AND SAFETY PROCEDURES SHOULD BE IMPLEMENTED PRIOR TO INSTALLATION AND OPERATION OF EQUIPMENT.
    Save this product for later
    Display prices in: AUD

    All your hydraulic needs in one place! Search products or browse categories below

    Products on Hydraulic.Online are described and explained in non technical terms, with photos, charts and or videos. Most of our clients also tend to upgrade to more complete systems this is because they can pick up a phone and call us for a consultation. Call us and experience it for yourself! Australia +61 (07) 5563 1982.

    (Hours 8am – 4pm Monday – Friday AEST, excludes National & QLD public holidays)

    https://www.youtube.com/watch?v=jpHhaZJd4IE