Remote Ctrl Package 5 Spool, 3 Remote Electro-Hydraulic Ctrl Valve 80 Lpm
TILT TRAY 5 SPOOL VALVE COMPLETE WITH REMOTE CONTROL PACKAGE
This 5 spool Monoblock valve comes with all three (3) of the spools fitted with Electro-Hydraulic Solenoid cartridge valves, & two for your car cradle that are manual actuated only.
Complete with remote control. IDEAL FOR TILT TRAY TRUCKS WITH CAR CRADLE.
To fit, Simply bolt-on, either re-attach your existing hoses, or worst case buy adaptors (we can supply cheaply) to make your hose threads compatible. Some wires do need to be attached, instructions are provided.
Made in Europe this monoblock valve is specifically designed for remote control applications.
The valve also comes standard with 5 manual override hand actuation levers. . # Please note, for all our monoblock valves, levers can be at either vertical or horizontal fitting. ALSO, the lever boxes, are able to be rotated 180° so that you can further orientate the levers.
Not to mention and light flexible air tubing that is susceptible to deterioration and damage.
- Greatly simplifies and tidy's up the hydraulic system's architecture,
- Speeds up installation and set up and
- Improves reliability and consequently safety.
Principals of operation.
- divert a small amount of system Oil flow from the actual hydraulic circuit to
- move the flow control spool and
- change the direction of the flow of hydraulic oil.
- Automotive Tilt Trays,
- Mobile Plant
- Wood Chippers
- Stump Grinders and
- Agricultural equipment.
Installation; As per photos, there is One side intry pressure port "P" , and one side entry Tank return port "T ",
Top entry Pressure and Tank ports are available for use.... with modifications to the Eletro Hydraulic Supply and Return piping.
There is also a "N" port. This "N" port is for the: "Power Beyond" function.
This allows another valve to run pressure from this "N" port downstream if necessary.
(Power beyond must be less than or equal to 80 litres / min flow)
A & B ports will connect to your cylinders, motors or other functions.
REMOTE CONTROL INFORMATION
This 8 button remote control is sent set up to control three double acting functions, winch, tilt, slide. There are two spare button, however these will need extra cabling to function. We can install the extra two functions wires, for an additional cost, or you can retro fit if required. These buttons could be used for worknights etc etc. The receiver is easily able to be adjusted to allow for 'latching' of buttons, ie press once, function stays on until pressed again.
The battery in the hand piece remote is a common 9 Volt, changing it is just done with a small Philips head screwdriver, & the remote is self pairing (Multicode)
All your hydraulic needs in one place! Search products or browse categories below
Products on Hydraulic.Online are described and explained in non technical terms, with photos, charts and or videos. Most of our clients also tend to upgrade to more complete systems this is because they can pick up a phone and call us for a consultation. Call us and experience it for yourself! Australia +61 (07) 5563 1982.
(Hours 8am – 4pm Monday – Friday AEST, excludes National & QLD public holidays)