STUCCHI 3/4 Flat Face Hyd Couplers High Flow 280 L/min

SKU 3/4" stucchi
AU$130.00
In stock
1
Product Details

CLEARANCE SALE ON GENUINE STUCCHI SERIES A FLAT FACE ISO 16028 3/4" BSPP THREAD

New Old Stock (less than 24 Months). The couplers are a widely used type in Australia,

These are brand new couplers, There is some surface scuffing on some, but these are top off the line couplers at less than half price. # We have only 9 sets of these available

Used extensively in all manner of mobile Hydraulic machinery, these flat face couplers are the most common flat face size for Australian used machines. They have 3/4" BSPP Threads. It is easy to check compatibility and only takes a minute.

Please refer to our size charts in photos for correct sizing. The best measurement to use is 'J' column. ** These are A 17 size

Please note , this sale is ONLY for 3/4" x 3/4" couplers , the A17 dimension coupler in the chart. If you need other sizes in the chart, please check our other listings or message us for prices.


These 3/4" flat face couplers are compatible with;

DNP PLT4, Stucchi FIRG/A Series, Faster 2FFI , Hansen QA, Ryco R110-06/08, Safeway FF49, Aeroquip FD89/FD49

Threaded Connections

3/4" BSPP

Rated Working Pressure

350 Bar (5100 PSI)

Flow Rates

From 40 to 280 Litres/Minute

Optimum Flow Rate 150 to 230 Lt/Min

Pressure drops

0.1 Bar @ 40 Litres / Minute

6 Bar @ 280 Litres / Minute

Operating Temperatures

-20 to 100 degrees Celsius

Materials of Construction

Carbon steel body, treated to increase hardness and corrosion resistance, Nitrile seals. H Series couplings are Zinc plated.

Weight

750 gms

Features

Flat mating faces are easily wiped clean to prevent the ingress of contaminants.

Improved flow path minimises the pressure drop.

Non-spill design avoids fluid loss during connection and disconnection.

No air intrusion during connection.

Locking sleeve prevents accidental disconnection.

Zinc nickel surface treatment and meets 200 hour salt spray tests.

Standard

This Series conform to ISO 16028 (2006) in all respects

Connection / Disconnection Under Pressure

Connection with residual pressure in the line will be difficult or impossible. For applications where connection under pressure is required, HCP male couplings, or screw couplings from either the HSC, HS or RS ranges are recommended.

Disconnection of any quick disconnect / quick release coupling whilst under full system pressure can be very dangerous and should not be attempted.


Buy with Confidence from a long established Hydraulic Service Center get a 12 month warranty and an Australian Tax Invoice.
Email: hosefixersaustralia@gmail.com
Phone: 07 5563 1982
Hours: 8am to 4pm Monday - Friday, excluding public holidays
Tax invoices are supplied with every purchase


If you have any questions please don’t hesitate to contact us for further assistance.
Best regards,
Hydraulic.Online



IMPROPER SELECTION, INSTALLATION, IMPLEMENTATION AND/OR OPERATION BY ANYONE OTHER THAN PERSONS WITH APPROPRIATE TECHNICAL AND MECHANICAL TRAINING CAN RESULT IN DAMAGE TO EQUIPMENT OR PROPERTY, SERIOUS PERSONAL INJURY OR DEATH. PROPER PRECAUTIONS AND SAFETY PROCEDURES SHOULD BE IMPLEMENTED PRIOR TO INSTALLATION AND OPERATION OF EQUIPMENT.

Save this product for later

All your hydraulic needs in one place! Search products or browse categories below

Products on Hydraulic.Online are described and explained in non technical terms, with photos, charts and or videos. Most of our clients also tend to upgrade to more complete systems this is because they can pick up a phone and call us for a consultation. Call us and experience it for yourself! Australia +61 (07) 5563 1982.

(Hours 8am – 4pm Monday – Friday AEST, excludes National & QLD public holidays)

https://www.youtube.com/watch?v=jpHhaZJd4IE