Swivel Foot Ball End Pad to Suit Hydraulic Cylinder Rod End

Swivel Foot Or Ball End Pad To Suit A Hydraulic Cylinder's Rod End.
Use this Swivel foot to replace the Standard Female Clevis on the end of a hydraulic Cylinder's Rod.
Ideal when you are using a cylinder as a stabilizer leg or to prevent load shifts when loading and unloading heavy machinery or equipment.
You can weld any size of Plate round or square to the bottom of the swivel foot and the swivel ball-type design will allow the plate to adjust its angle to suit the terrain or ground.
Made from Steel for Heavy Duty applications comes complete with a 1/8 BSPT Grease nipple hole.
These swivel feet will fit all our Australian-made rams as well as most AG-style rams.
It has a 1-1/4" UNF thread
Email: hosefixersaustralia@gmail.com
Phone: 07 5563 1982
If you have any questions please don’t hesitate to contact us for further assistance,
Best regards,
Hydraulic.Online
Improper Selection, Installation, Implementation, And/Or Operation By Anyone Other Than Persons With Appropriate Technical And Mechanical Training Can Result In Damage To Equipment Or Property, Serious Personal Injury, Or Death. Proper Precautions And Safety Procedures Should Be Implemented Prior To The Installation And Operation Of Equipment.