1/2" 2 Wire Hydraulic Hose 10m SAE100R2 4000 PSI | ENGMATTEC

SKU H3KTU4VG
AU$76.00
In stock
1
Product Details

10 meter coil of HYDRAULIC HOSE 1/2" (half inch) ID Two Wire 4000 PSI (275 bar) Working Pressure with High Temp resistant to 120 °C.

ENGMATTEC two wire hydraulic hoses are fully compatible, interchangeable or a direct replacement for many popular and more expensive hydraulic hose brands and types.

See below for more details.

Buy it now online

https://www.hydraulic.online/store/100R2-Two-Wire-S...

and eBay Australia.

http://www.ebaystores.com.au/hydrauliconline/_i.ht...

ENGMATTEC is a Non-Skive Hose which means the outer cover does not need to be removed before pressing or screwing on the appropriate Hydraulic Hose Fittings.

Most People Purchase and then Re-order the following four most common ENGMATTEC sizes of Two (2) Wire braided hydraulic hose and these 4 sizes are as follows.

100R2AT 1/4" DN6,

100R2AT 3/8" DN10,

100R2AT 1/2" DN12,

100R2AT 3/4" DN19.

Please contact us for detailed and accurate crimp dimensions

ENGMATTEC SAE100R2AT two 2 wire hydraulic hose is compatible with.

GATES 4G2, 6G2, 8G2, 12G2 and GATES High Temperature 4G2H, 6GTH, 8G2H, 12G2H

EATON GH195 AQP HI-IMPULSE hoses

MANULI FLUICONNECTO 2SN FL2T04 FL2T06 FL2T08 FL2T12

MANULI FLUICONNECTO ROCKMASTER 2SC H01030006 H01030010, H01030012, H01030019 (DOUBLE THIS HOSE’S BEND RADIUS, SLIGHTLY LESS WEAR RESISTANCE)

PARKER 301SN - 4, -6, -8, -12 NON SKIVE HOSE.

PIRTEK SAE 100R2AT,

SIZES R2AT-04, R2AT-06, R2AT-08, R2AT-12.

TOTAL RUBBER SUNFLEX SAE 100 R2AT EN 853 2SN,

SIZES HYD-R2T-04-SF-S, HYD-R2T-06-SF-S, HYD-R2T-08-SF-S, HYD-R2T-12-SF-S.

RYCO AVENGER SIZES, T24A, T26A, T28A, T212A and

RYCO DIEHARD SIZES, T24D T26D T28D AND T212D Non-Skive Hoses. (with slightly less wear resistance)

ENGMATTEC'S FOUR MOST COMMON HYDRAULIC HOSE BORE SIZES ARE AS FOLLOWS.,

100R2AT 1/4" DN6,

100R2AT 3/8" DN10,

100R2AT 1/2" DN12,

100R2AT 3/4" DN19

ALL THE Hoses listed above can also be used with the following POPULAR BrandS of Hose Fittings with the following part numbers.

Our own EngMatTec EMT 2 PIECE HOSE TAILS AND FERRULES ARE AVAILABLE FOR BOTH One (1) AND Two (2) WIRE BRAIDED HOSE IN

04 - ¼”a, 06 - ⅜”, 08 - ½”,12 - ¾”, 1” - 16,.

FOR EXAMPLE THE FOLLOWING SIZES AND THREAD TYPES ARE AVAILABLE

JIC FEMALE AND MALE HOSE TAILS SIZES,

E04JF, E04JM,

E06JF, E06JM,

E08JF, E08JM,

E12JF, E12JM,

E16JF, E16JM.

BSP FEMALE AND MALE HOSE TAILS SIZES,

E04BF- E04BM,

E06BF, E06BM,

E08BF, E08BM,

E12BF, E12BM

E16BF, E16BM

ALL AVAILABLE WITH OUR OWN EngMatTec EMT Crimp on NO SKIVE Ferrules THAT ARE AVAILABLE IN THE FOLLOWING SIZES,

ENPR204 (¼”), ENPR206 (⅜”), ENPR208 (½”), ENPR212 (¾”) ENPR216 (1”).

Contact us for stock AND or Crimp Dimensions.

https://www.hydraulic.online/store/

RYCO BITELOK ONE-PIECE CRIMP NON SKIVE T200 AND T700 hose tails.

EATON TTC / Z Series braided hose one-piece "bite the wire" style hose fittings.

Southcott Super Crimp S series stems with FNP-04, FNP-06, FNP-08, FNP-12 ferrules as well as Ezi-Crimp Non Skive One Piece Series E fittings.

CHILD FIELD FIT COUPLINGS Series RMB, RFB, RMJ, RFJ, with BN2-04, BN2-06, BN2-08, AND BN2-12 non skive Bodies.

RYCO FIELD ATTACHABLE L SERIES L00-04, LOO-06, LOO-08, LOO-12 FERRULES and 600 SERIES INSERTS.

TAIPAN SERIES ONE PIECE NON SKIVE HOSE TAILS

K04JF, K06JF, K08JF, K12JF, AND K04JM, K06JM, K08JM, K12JM and

K04BF, K06BF, K08BF, K12BF, AND K04BM, K06BM, K08BM, K12BM or

TAIPAN Field Attachable D04, D06, D08, D12 Tails and D2-04, D2-06 D2-08, AND D2-12 Bodies.


This is a high quality hose made in Europe t o meet or exceed SAE 100R2 hose (Society Of Automotive Engineers) and EN 853 German Specifications.

This hose is Certified to work without failure a minimum of 200,000 Impulse Cycles (equivalent to almost 1000 excavator earth moving hours) at 133% of maximum pressure (5320 psi) and at 100% of maximum temperature 120 °C.

Branded ENGMATTEC (Engineering Materials Technology)

For close to 10 years we have used this same hose extensively in our service center as well as out of our hydraulic service trucks to produce more than 50,000 hose assemblies.

Use for repairs as well as new installs to all sorts of machinery in the Automotive, Earth Moving, Farming, Manufacturing, Marine, Materials Handling and Transport industries.

It has a great tough abrasion resistant outer case, yet is very flexible for easy fitment. This hose is a quality product, It suits either crimped ends, or our D.I.Y field fit reusables also available from this web store.

Model: 100R2AT-08

This is a good quality hose made in Europe to SAE (Society Automotive Engineers)

SAE 100R2 – 08 NON SKIVE HOSE (Two Braided Wire)
Picture is off actual hose .

Hose details
Construction
Synthetic rubber inner tube with Two layers of braided high tensile steel wire reinforcement and a wrapped, Oil, Ozone, Weather and Abrasion Resistant synthetic rubber outer cover.
Application
High pressure service with petroleum base hydraulic fluids, water, Air, Water-glycol, water-oil, fire resistant hydraulic fluids, hot oil grease, lubricants, crude and fuel oils. For air applications above 100 PSI the cover should be pin pricked.

Specifications

Pressure Range
Working Pressure: 4040 PSI
Burst Pressure: 16000 PSI (Minimum)
Range of Temperature
-40⁰C to + 120⁰C
Minimum Bend Radius
180mm
Weight
0.63 KG/Mtr Total packed weight 6.4 KG

Need another hose size, field fit reusable fittings couplers and or adaptors for your application?

Contact us on 075563 1982

We also offer ‘Depot to Depot’ freight as a cheaper alternative for larger items. Please call or email for this freight option

Contact us

Email hosefixersaustralia@gmail.com

Tel +61 (07) 5563 1982

5/10/19 MM $

20/09/19 MM $ Abc Pic

26/7/2020 MM +Content

26.10.20 $RL


Save this product for later