Hydraulic Flat Face Quick Connect 1/2" Dry Break Zero Leak 5100 PSI 1/2" OR 3/4"

SKU Hydraulic Flat Face Quick Connect 1/2" Dry Break Zero Leak 5100 PSI
AU$82.00
Out of stock
1
Product Details

Buy with confidence from a long established Hydraulic Service Center and 65 get a 12 month warranty and an Australian Tax Invoice when you purchase this item.

FLAT FACE COUPLERS ISO 16028

These High Quality Dry Break quick connect hydraulic couplings are suitable for applications involving dusty or dirty environments and where oil loss on disconnection cannot be tolerated. These are designed to the ISO 16028 standard (& the most common), & are interchangeable with the following brands of flat face couplers:

DNP - PLT4, Stucchi FIRG/A Series, Faster 2FFI (up to 1/2" body) & FFN38, Hanse QA, Ryco R110 08 , Safeway FF49, Aeroquip FD89/FD 49

The above price is for one pair, (one set which includes one male and one female coupler)

Flat face couplers come in a variety of BODY sizes as well as various threads. It is important to measure the tip of the Male flat face & compare it to the column highlighted in our photo to ensure correct fitment.

This series of couplings are designed for use in excavator hammer and Auger circuits and other applications involving high pressure pulses. Construction plant, mobile equipment, general industrial, nuclear, mining and agricultural.

Used extensively on Yanmar, Bobcat, Digga, Ditch Witch, and Case equipment, ( some Bobcat couplers will require SAE/UNO Instead of BSP female thread)

Dimensions and Performance.

Thread size Chart ID & OD of threads

Please note column J is MOST IMPORTANT !

We can supply all of these, call us

Threaded Connections/ Body sizes available

  • 1/2" Body x 1/2" Bspp thread
  • 1/2" Body x 3/4" Bspp thread
  • 1/2" Body x 7/8" Uno thread
  • 1/2" Body x 1-1/16" Uno thread
  • 1/2" Body x 1" ORFS male bulkhead thread
  • 5/8" Body x 3/4" Bspp thread
  • 3/4" Body x 3/4" Bspp thread


Rated Working Pressure

350 Bar (5100 PSI)

Flow Rates

From 20 to 150 Litres/Minute

Pressure drops

less than 0.1 Bar @ 20 Litres / Minute

6 Bar @ 150 Litres / Minute

Operating Temperatures

-20 to 100 degrees Celsius

Materials of Construction

Carbon steel body, treated to increase hardness and corrosion resistance, Nitrile seals. H Series couplings are Zinc plated.

Weight

750 gms

Features

Flat mating faces are easily wiped clean to prevent the ingress of contaminants.

Improved flow path minimises the pressure drop.

Non-spill design avoids fluid loss during connection and disconnection.

No air intrusion during connection.

Locking sleeve prevents accidental disconnection.

Zinc nickel surface treatment and meets 200 hour salt spray tests.

Standard

This Series conform to ISO 16028 (2006) in all respects

Connection / Disconnection Under Pressure

Connection with residual pressure in the line will be difficult or impossible. For applications where connection under pressure is required, HCP male couplings, or screw couplings from either the HSC, HS or RS ranges are

recommended.

Disconnection of any quick disconnect / quick release coupling whilst under full system pressure can be very dangerous and should not be attempted.

Freight is $13.40 Aust Wide, & $1.00 per extra item


IMPROPER SELECTION, INSTALLATION, IMPLEMENTATION AND/OR OPERATION BY ANYONE OTHER THAN PERSONS WITH APPROPRIATE TECHNICAL AND MECHANICAL TRAINING CAN RESULT IN DAMAGE TO EQUIPMENT OR PROPERTY, SERIOUS PERSONAL INJURY OR DEATH. PROPER PRECAUTIONS AND SAFETY PROCEDURES SHOULD BE IMPLEMENTED PRIOR TO INSTALLATION AND OPERATION OF EQUIPMENT.

Save this product for later