Hydraulic Flow Test Kit 0-120 Lt/Min 30 G/min 6000 PSI

SKU 10002
AU$1 995.00
In stock
1
Product Details

Manufactured by Webtec UK for Stauff Germany

  • Test hydraulic oil flows in any circuit with flows up to 120 Liters per minute and pressures up to 6000 PSI (400 bar)
  • This listing is for a Bi directional oil flow test kit
  • The latest upgrade has been to take the basic Single Direction to Oil Flow design and make it Bi Directional Oil Flow Design.
  • This upgrade takes all errors out of the connection and testing process as well as being able to test Bi Directional Pumps, closed loop systems as well as Motor and cylinder circuits without having to disconnect and reconnect.
  • This upgrade is awesome value for money at an additional $530 and is well worth it for the additional flexibility and versatility it provides.

The kit comes complete 2 high pressure hoses and 18 different adaptors that allow you to connect to:

  • BSP threads from 1/4" to 3/4 ",
  • JIC threads from 9/16" to 1-1/16"
  • ORFS Threads from 9/16 to 1-3/16".

Full operating instructions and worked examples are also provided.

Assembled from quality components this kit is designed to measure the following.

  • Oil Flows up to 120 litres per minute or (30 US Gallons/Min)
  • Induce and measure pressures up to 400 Bar (6000 PSI).

A "Stauff" Hydraulic Flow Indicator, manufactured by Webtech in

  • This flow test kit is designed to accurately test low to medium flow hydraulic circuits such as those found in factories and mobile equipment up to 12 tons such as;
  • Tractors
  • Street sweepers,
  • Concrete agitators,
  • Tippers,
  • Tow trucks
  • Skid Steers, Positrack earth movers,
  • Excavators,
  • Front end Loaders,
  • Tilt trays, Scissor lifts
  • Forklifts and
  • any most hydraulic circuits with flows up to 120 Liters per minute or less.
  • The kit comes complete 2 high pressure hoses and 18 different adaptors that allow you to connect to:

    • BSP threads from 1/4" to 3/4",
    • JIC threads from 9/16" to 1-1/16"
    • ORFS Threads from 9/16 to 1-13/16". .

    Full operating instructions and worked examples are also provided.

    Assembled from quality components this kit is designed to measure the following.

    • Oil Flows up to 120 litres per minute or (9 US Gallons/Min)
    • Water Flow up to 38 Liters per Minute (9.5 US Gallons/Min)
    • Induce Pressures and measure pressures up to 420 Bar (6000 PSI).

    Why pay $3,000 or more when you can have it all delivered to your door for $1,995.

    The main Components of the test kit include the following.

    A WEBTEC Hydraulic Flow Indicator, manufactured by Webtech in England, it has the following features.

    · Flows up to 120 Litres per minute (30 US Gallons per minute)

    · Pressures up to 420 Bar (6000 PSI)

    · Accuracy 4% of full scale

    · 3/4" BSP port size

    · No batteries required.

    · A 600 Bar (8000 PSI) "Stauff" Liquid Filled Stainless Steel Pressure Gauge

    · Full Aviation grade Aluminium Construction.

    • A "Stauff" Steel Flow Control Valve made in Germany and rated to 350 BAR (5150 PSI).
    • With 3/4" BSPP ports, large easy to turn manual adjustment handle and a visual indicator of valve position.
    • A pair of Test Hoses each 1.5 meters long and having a 3/4" Inside diameter Rated as SAE 100R19 at 275 Bar (4000 PSI) working pressure and having a minimum burst pressure of 1000 bar (14700 PSI).
    • Eighteen (18) Assorted JIC, BSP and ORFS adaptors to be able to virtually connect and flow test any piece of machinery.

    The Entire test kit is mounted in a Heavy Duty Black plastic case.

A flow test kit is the quickest and least invasive way to quickly check for internal leakage of a suspected component in a hydraulic circuit be it a valve, motor or pump.

A flow test kit can also be used to ascertain if the engine or motor powering the hydraulic system is in good condition and or even capable of powering the hydraulic systems requirements.

Hydraulic pumps, directional control valves, relief valves and cylinders in a hydraulic circuit can be individually checked for internal leakage.

Principle of operation,

The flow test kit is added into the hydraulic circuit and is connected as close as possible before or after the suspected component.

Using a relatively easy process of recorded measurements, logic and simple elimination each component can be individually tested and results compared to the performance of the rest of the hydraulic circuit.

The process described below is used for testing a hydraulic pump.

The flow test kit is installed as close as possible to the pump's pressure port.

The pump is started and allowed to free flow without load. Flow, and temperature are recorded at free flow.

The flow control valve is then slowly closed to induce a resistance to flow and any changes to flow, pressure and temperature are recorded (usually at 500 PSI intervals) this test is usually carried out up to the pump's maximum manufacturers recommended pressure.

Results are then compared to manufacturer's data to ascertain any loss in performance. Contact us on +617 5563 1982 with any questions or special adaptor requests.

IMPROPER SELECTION, INSTALLATION, IMPLEMENTATION AND/OR OPERATION BY ANYONE OTHER THAN PERSONS WITH APPROPRIATE TECHNICAL AND MECHANICAL TRAINING CAN RESULT IN DAMAGE TO EQUIPMENT OR PROPERTY, SERIOUS PERSONAL INJURY OR DEATH. PROPER PRECAUTIONS AND SAFETY PROCEDURES SHOULD BE IMPLEMENTED PRIOR TO INSTALLATION AND OPERATION OF EQUIPMENT.

Save this product for later