Porta Power Air Driven High Pressure Hydraulic Pump 10000 PSI 2 m Hose & Coupler
Supply this pump with 120 PSI of compressed air and it will generate up to 10,000 PSI Hydraulic Oil pressure to actuate or operate any single acting implement or attachment.
This a popular upgrade from the slow manual hand pumps, used by Auto Body Repair Shops, Mechanical & Fabrication shops as well as in the field by mechanics to more quickly Press, Pull, Push and Pry Apart and by Boiler makers to Punch, Bend, Shear, Cut or Twist materials using specialist High Pressure Hydraulic cylinders, rams and attachments.
Safe for mining environments, and or other situations when electricity and possible sparks are prohibited.
High pressure supply for scissor lifts for lifting cars and motor cycles.
Supplying cylinders attachments in collision repair shops and Auto body frame pulling machines and racks.
Clamping cylinders in fabrication Workshops.
Pipe and tube Benders
Frame straighteners in auto collision centers.
Spreading attachments in mechanical workshops
Axle correction in trucks busses and other transport equipment
Suspension and alignment workshops.
Torque Multipliers in oil, gas and mining equipment applications.
Bolt tensioners and nut splitters
Cable crimpers and terminations for electrical, marine, fencing and safety barriers.
This ENGMATTEC Pump uses the principal of Intensification to generate 10,000 PSI of oil pressure with only 120 PSI of Compressed air.
If you want to modify your existing press hoses to fit this air operated pump please see the following video. Video Time Stamps
1:02 Unboxing, Pump Hose and Couplings,
2:05 Assembly and Testing
4:25 Filling with hydraulic oil and Priming pump
7:05 Pressure Testing on 50 Ton Capacity press.
8:15 Using the Pump to press on a small bearing
8:56 Fun with a 50 ton press
Widely Used by Auto body shops, Panel Beaters, frame straighteners, Suspension shops, Hydraulic presses, Mechanical Workshops, Car jacks, Scissor Lifts, Rescue equipment, Torque Multipliers, Punches , Shears Expanders and Cutters.
Pull cylinders for structural steel, panel beating, automotive repairs, ship building and cable or tower tensioning
This is a Quality unit Built with an all metal pump assembly, heavy duty seals, and a large 2.3 liter oil tank made from impact resistant ABS plastic.
This unit is also fully rebuildable with parts kit readily available at reasonable prices.
Unique features include.
Vary the air in pressure in vary oil out pressure (minimum 60 PSI)
Hand or Foot operation
The units comes with a two (2) meter long Ultra high pressure hose rated to 17,000 psi working pressure complete with a male high pressure couplers and bend restrictors and dust caps for longer hose life.
Oil level sight glass in tank wall
3 in one filler breather transport cap.
Larger than average impact resistant Hydraulic oil tank with 2.3 liters capacity
Compatible and interchangeable with the majority of tooling manufactured for of by a large range of other air hydraulic pump manufacturers such as Fleet-Hydrol, Durapac, Enerpac, Simplex, SPX, Power Team, Porta Power, Porto power, Power ram, for all High pressure Pressing Bending Lifting Pulling Torque Multipliers Tensioning requirements.
Operation, Simple foot pedal or hand operation
Unit has a Simple three (3) stage pedal operation, UP, HOLD, RELEASE.
Push forward pump starts to generate flow and pressure
Pedal to middle position pumps stops and holds the pressure and or load
Press Back and pressure is released and load is dropped or removed.
Provision for mounting to any surface using appropriate length self tapping screws.
Unique breather / transport cap.
Ergonomically designed aluminium foot pedal (can also be hand actuated)
Powder coated steel tank cover.
SINGLE ACTING AIR ACTUATED HYDRAULIC PUMP 10,000 PSI (685 BAR)
This Single-speed pump, simple operation and easily portable due to its lightweight, compact design. Pump output pressure can be easily adjusted by adjusting air input pressure with an air pressure regulator (also available from this Store) , for example