REMOTE CONTROL 3 SPOOL MONOBLOCK VALVE 80LPM TILT TRUCKS , READY FOR FITTING

SKU REMOTE READY MB5-3
AU$2 882.00
In stock
1
Product Details


Ready to fit Remote control Monoblock control & 3 lever control valve

This is a brand new high quality 80 litre per minute valve complete with 6 button remote control unit. It is designed for Tilt Tray Trucks, Cranes. Skip Bin Trucks, Front end Loaders, Backhoes or any application where you need to control 3 individual cylinders or hydraulic motors (ie winches). This unit can replace most medium to large tilt truck existing spool valves. Simply bolt on, either re attach your existing hoses, or worst case buy adaptors (we can supply ) to make your hose threads compatible. The remote unit simply needs air supply, power, 12 or 24 volt, & basic wiring to the valve solenoids. The only other item needed is 4 mm nylon tubing from your air supply to the solenoids. Our valve solenoids come complete with push fit air fittings. The 6 button remote comes with a fixed transmitter which can also be used directly to control the valve. Levers are still attached for convenient manual use. This valve comes standard with 3 cylinder spools, which means when the lever/or button are released, the tray, winch etc will lock in place.
These valves are regularly used in hydraulic circuits to divert the flow of high pressure oil and are typically used to control the speed and movement of hydraulic cylinders or motors.

The remote is a water resistant unit which comes with a installation guide.

Specifications
  • Construction = Monoblock
  • Material of Construction = Steel
  • No of Spools = 3
  • Material of Construction = Case Hardened Steel
  • O-rings made of NBR (Buna-N®)
  • Max Flow Rate = 80 liters/min (20 Gallons per Minute)
  • Max Working Pressure = 315 Bar (4725 PSI)
  • Spool Type = Cylinder
  • Spool Movement = Lever action, Spring Return to Center.
  • Built in Relief Valve = Adjustable (factory set at 175 bar 2500 PSI)
Ports Sizes
  • Pressure Port 3/4" BSPP
  • Cylinder Ports 1/2" BSPP
  • Tank Port 1" BSPP
  • Power beyond port 1" BSPP
  • Operating temperature range: -20 °C to + 80°C
  • Dimensions = L x W x H = 250 x 200 x 60 mm
  • Weight 15 KG
  • Detent Kits also available at $60 each
  • Power beyond plug $23


Please call 0755631982 or send us a question via Email for different spool configurations, spool numbers and costings.

Many types of adapters threads, hydraulic hose and field fit hose fittings available please see our other listings

This a High Quality Valve and has many outstanding features, including.
  • built in adjustable relief valve
  • high performance,
  • high efficiency,
  • small volume,
  • mass flow,
  • leak resistance.
Features
  • Compact construction.
  • Low pressure drop.
  • Long service life.
  • High efficiency.
  • Choice of various ports and circuit valves.
  • High accuracy spool is hardened for long term accuracy.
  • Sub-plate mounting.
  • Handle shift operation.
Postage
Australia Wide $45*
*Some remote areas may incur an extra surcharge
Please note*

These 80 LPM valves require a separate "Power Beyond" sleeve to operate a valve downstream.

Detent is when a you push/pull a lever, it stays forward/back at that position until you move it back to the centre.

Installation ; As per the listed photos, there are a choice of two pressure ports "P" (only use one), two "T" Tank return ports and also there is a "C" port. This "C" port is for the: Power Beyond function. This allows another valve to run pressure from this C port downstream if necessary. (must be a lower volume though). A & B ports run to your cylinder or other functions.


OUR EMAIL IS – HoseFixersAustralia@gmail.com

Additional information about us...

Tax invoices are supplied with every purchase

Emails will be answered within normal business hours (ie: 8.30am - 5.00pm M-F)

Out of Stock

It is our desire to always have every listed item actively in stock. Occasionally (but very seldom) due to high demand, short supply or human error we may be momentarily out of stock on an item.

If this happens you will be notified and given the option to either cancel for a full refund or wait for the part to come in (typically 3-14 days)

With any questions, please, don’t hesitate to contact us for further assistance.

Best regards,
Hydraulic.Online

Save this product for later