STAUFF Digital Pressure Test Kit 8,800 PSI 2M Test Hose
SKU Stauff Digi Kit
Precision 80 mm Diameter Digital Pressure Testing Kit complete with a 2 meter long test Hose and various Adaptors all packed in a durable, Impact, Oil and water Resistant Plastic Protective Case, Pressure range from 0 - 8800 PSI (0 - 600 Bar)
Designed and Manufactured In Germany by Parker Hannifin for Stauff Corporation, this is a durable instrument that has been assembled to measure & display the pressure of Oil, Water & Lubricants
It will display current, min & max pressure in Bar, PSI, MPa, kPa ,mbar.
Accuracy 0.5% full range,
Ingress Protection = IP 67 (6 = Completely Dust Tight, 7 = Able to Withstand Full Immersion in Water up to 1 m Deep for 30 minutes)
This is an essential tool for any mechanic, technician of all types of hydraulic machinery.
Available in various ranges
Neg -1 - +16 bar (240 PSI),
0 - 600 bar (8800 PSI)
Buy with Confidence from a long established Hydraulic Service Center get a 12 month warranty and an Australian Tax Invoice.
Stauff Digital test kit
Please select gauge range in drop box. It comes in a safe case along with 2M long test hose & test 20 adaptors as per below. We recommend simply 'teeing' into a pressure line & using supplied Bsp adaptors.
# An option of receiving a Female Cat Test point is available
These gauges fulfill the safety requirements of German Standards EN 837-1/S2.
It has a range of readouts (photos) & comes with instructions.This combination allows instant accurate pressure reading simply by attaching to standard test ports found on most hydraulic machinery, tractors etc. This will give you a clear diagnosis of actual pressures and or potential problem areas on hydraulic valves, pumps or can be used anywhere in the hydraulic system
Lightweight with carry handle and locking latch
Tough, easy to clean plastic case
Storage compartment for test hose
Oil resistant foam
Digital pressure gauge choice of one of the standard digital pressure gauges listed below: 1 x -1-+16 BAR/PSI 1 x 0-600 BAR/PSI
Zinc/Nickel plated metal fittings
Test hose 2 metres long with dust caps
Suitable for mineral oil based fluids
Working Pressure to 600 bar
Back lit display
Test 20 x 1/4" BSPP
Test 20 x 1/8" BSP
1/2" Bspp x 1/8" Bspp reducing bush
3/8" Bspp x 1/8" Bspp reducing bush
Test 20 x test 20 Joiner
Rubber boot to protect digital gauge
▪ Objective, To measure and display pressures
▪ Bar graph display (drag indicator) ▪ Background lighting ▪ Zero correction ▪ Battery charge display ▪ With the CE mark ▪ Calibration certificate on request , extra $100
Materials ▪ Housing made of die-cast Zinc with TPE rubber protective covering ▪ Wetted parts: Stainless Steel 1.4404, NBR, ceramic ▪ Gaskets: NBR (Buna-N®), FPM (Viton®)
▪ -1 ... 600 bar / -14.5 ... 8702 PSI
Dimensions and Weight; Gauge ▪ Diameter: 79 mm / 3.11 in ▪ Depth: 33 mm / 1.30 in ▪ Weight: 540 g / 1.19 Ibs
Display ▪ Text display 4 1/2-digit ▪ Size: 50 x 34 mm / 1.97 x 1.34 in ▪ Actual value display: 15 mm / .59 in ▪ MIN-/MAX or FS* display: 8 mm / .31 in ▪ Units: bar, PSI, MPa, kPa, mbar ▪ Peak pressure measurement with 10 ms sampling rate ▪ Lighted measured value display
Process Connections ▪ G1/4 made of 1.4404 Stainless Steel ▪ Vibration: IEC 60068-2-6 / 10 ... 500 Hz / 5 g ▪ Shock: IEC 60068-2-27 / 11 ms / 25 g ▪ Load cycles (106): 100
Protection Rating ▪ IP 67 protection rating: Dust tight and protected against powerful water jets; even immersion (up to 1 m / 3.28 ft) in water is possible under defined conditions of pressure and time