TIPPER HOIST. 6.3 Ton Tipper Cylinder Two 2 Stage Bottom Lift with Inbuilt Tank 2525 mm Stroke

SKU TIPPER
AU$2 400.00
In stock
1
Product Details

This Tipper cylinder is Rated to lift 6.3 Tons at a maximum supply Pressure of 2000 PSI (136 bar)

Purchased for tipper cylinder Exchange Project but reseal and overhaul of original unit proved successful
This is a ideal tipper hoist for smaller tray trucks. The mounting plate is attached to the front wall of the tipper tub. It does not need to be mounted underneath. Also, you do not require a oil tank, as this has it's own built in tank. Simply hook up from your PTO / tipper valve. This comes with all required mounting brackets.
This design Lifts the tipper Body from the bottom of the body not from the top as in most designs.
Unit comes complete with a 19 litre Built in Hydraulic Oil Tank

It has a Unique Bottom Lift Design with Built in Hydraulic Tank

Mounting plates and bearings
Bottom lift foot mounts and plates.
Fasteners are NOT provided.
It has two (2) Telescopic Stages
The first stage will lift up to 6.3 tons at 2000 PSI and the second stage will lift 3.5 tons at 2000 PSI.
Full extension stroke is 2525 mm.
Please see attached Pictures, Charts and Graphs for detailed information on:
Detailed Specifications
WOMBAT FRONT MOUNTED HOIST (Australian made)
(WITH TANK) STANDARD SPECS:
  • More thrust per stage
  • Large thrust diameters
  • 2000 PSI rating (13.8 mpa) operating pressure
  • Sealing surfaces precision honed
  • Permanent pre-loaded seals
  • Positive sealing at high and low pressures
  • High tensile bronze top and bottom guides
  • Superior design eliminates special tools for servicing
  • High tensile hydraulic tubing
  • Precision tolerances
  • All mounting brackets included
  • We can assist with Pick us as well as Freight Australia Wide. Freight is pick up only, or send at your cost OK

Email

sales@hydraulic.online

Tel +61 (07) 5563 1982




Save this product for later